Picture of the Alexa Echo Studio speaker in Setup mode, displaying its orange light ring.

Alexa Echo Studio Setup Instructions

This post gives setup instructions for the Alexa Echo Studio hi-fi smart speaker, and the steps to follow to complete this device set up on a new WiFi network. Plus, this routine works for brand new Studios as well as used ones that you want to put on another network or account. Note though that in certain circumstances, your Studio may set itself up automatically if the following conditions are met:

  1. You have an Amazon account.
  2. You have at least one Alexa WiFi device set up on that account, such as a smart speaker.
  3. Your Echo Studio is in range of the WiFi network which serves that Alexa device.

After plugging the Echo Studio into mains power, give it a couple minutes, and if it announces that setup is complete, then you’re good to go. But if not, follow the instructions below to get it up and running.





Before you Start Alexa Echo Studio Setup

You must have the following at your disposal before attempting to set up the Alexa Echo Studio:

1. A Smart Mobile Device

You’ll need to run the Alexa app on a compatible mobile phone or tablet computer.  For this demo, we’re using an iPad Air tablet.

2. A WiFi Internet Connection

None of the Echo devices that we are aware of, come equipped with an RJ45 Ethernet port.  So, you may only set them up to the Alexa service through a WiFi network.  Further, that network must have internet access.

3. The Alexa App

Get the Alexa app in the Google Play (Android) store, or the App Store (iOS).  Download and install the right version for your device, and then log into it with your Amazon account details.  If you just created an account, be sure to use those credentials.

4. An Amazon Account

If you do not already have an Amazon account for your Studio, then get one at https://amazon.com/ .  Follow the prompts there to set one up.

Or, when you run the Alexa app in Step 2 under the Echo Studio Setup Instructions, Step-by-Step below, and you’ve never signed into the app with a valid account, Alexa will ask you to sign in, as shown next.

Screenshot of the Alexa app on iOS, displaying its Login prompt. Alexa Echo Studio Setup.
The Alexa app on iOS, displaying its Login prompt.

There, the app lets you create a new account if you don’t already have one.  If you do not, then press the  Create a New Amazon Account  button in the lower center portion of the login screen.  Then, the app walks you through that account setup routine.  Note that you must have an account to run the following steps.

5. Bluetooth

Turn on Bluetooth on your mobile device.  Why?  Because the app uses Bluetooth to find nearby Amazon Echo devices in some situations.





Alexa Echo Studio Setup Summary

  1. Connect the Echo Studio to AC Power.
  2. Next, put the speaker in Setup mode.
  3. Run the Alexa app.
  4. Then, enter Amazon account Id and Password if needed.
  5. If prompted to add a new device, skip ahead to step 12.
  6. If not prompted, then on the app’s home screen, tap the More menu item.
  7. Tap the Add a Device option.
  8. Next, tap the Amazon Echo device type.
  9. Touch the Echo Studio device item.
  10. Tap the Yes bar.
  11. Then, tap the listed Echo Studio to setup.
  12. Choose the WiFi network to connect your Echo Studio to.
  13. Next, Enter WiFi password if needed.
  14. Wait for your Echo Studio to Connect with your WiFi network.
  15. Tap the blue Continue bar.
  16. Next. tap the blue Continue bar.
  17. Pick the room where you will put your Echo Studio.
  18. Choose the street address where your Echo Studio will be located.
  19. Then, tap the blue Continue bar.
  20. Tap the blue Done bar.
  21. Finally, test out your Echo Studio.

Alexa Echo Studio Setup , Step-by-Step Instructions

1. Plug your Echo Studio into AC Power

Plug the included AC cord into the device.

Back view picture of the Amazon Echo Studio smart speaker, with the AC power cord inserted.
Back view of the Amazon Echo Studio smart speaker, with the AC power cord inserted.

Plug the other end of that cable into an AC outlet, and plug the adapter into a working outlet.  The speaker then boots up, as shown next.

Front top view picture of the smart speaker, showing the blue green light ring as the unit boots.
Front top view of the smart speaker, showing the blue green light ring as the unit boots.

2. Now Put your Alexa Echo Studio into Setup Mode 

Now, your Echo Studio is probably already displaying its orange light ring on the top of the unit, as shown next.  If you see that orange lighted ring, then skip ahead to the next step. Or if not, then work through this step.

Picture of the speaker in Setup mode, displaying its orange light ring.
The speaker in Setup mode, displaying its orange light ring.

After connecting a new Echo Studio to AC power, the unit typically enters Setup mode automatically.  You will also hear it announce this. and as mentioned, the ring will turn orange and display a spinning pattern.

But if this is not a new Echo Studio, it may not right away go into Setup mode.  So in that case, you must reset it.  In short, to reset, press and hold the Action button, as pointed out in the next picture, until the Studio starts resetting.  After this hard reset, the unit then enters Setup mode.

Picture of the -Action- button on the Alexa Echo Studio speaker.
The -Action- button on the Alexa Echo Studio speaker.

At any rate, how ever you get it into Setup, once you have it there, move on to the next step.

3. Then, Run the Alexa App

Find the Alexa app on your mobile device, as we did on the iPad Air tablet, as shown in the next picture.

Screenshot of the iOS home screen, showing the Alexa app Icon highlighted. Alexa Echo Studio Setup.
iOS home screen, showing the Alexa app Icon highlighted.

Tap the Alexa app icon to run it. If this is your first time starting the app, it will prompt you for your Amazon account and password. Again, if you just set up a new account above, log into the app with those account credentials.

Plus, if this is your first Echo device, the app will ask you to set up a new device.





4. Enter Account Id and Password to Continue with Alexa Echo Studio Setup

Should the Alexa app prompt, enter your Amazon account details.  Doing this will sign you in via the Alexa app.  The app then remembers your account information the next time you run it, so that you won’t have to punch in this data every time.

5. If you are Prompted to Set Up a New Echo Studio Device… 

The later versions of the Alexa app are pretty good at detecting new devices nearby.  So upon starting the app, you may very well see the following screen.

Screenshot of the Alexa app on iPadOS, prompting to set up the Echo Studio smart speaker.
The Alexa app on iPadOS, prompting to Set up the Echo Studio smart speaker.

If so, tap the blue Continue button, and then skip ahead to step 12 below.  As seen in that step, the system then prompts you to select the WiFi network.

6. If you are Not Prompted to Set Up a New Echo Studio Device…

If the app does not detect your new Echo Studio immediately, it displays its  Home  screen.  We got the Home page right away, since we have other devices on our Amazon account.

Screenshot of the Alexa app on iPadOS Home page, with the -More- Item highlighted.
The Alexa app on iPadOS Home screen, with the -More- Item highlighted.

But if you see the following screen, then your system is prompting you to set up a new device.  So skip ahead to step 7 below.

7. Tap the More (Hamburger) Button to Continue with Alexa Echo Studio Setup

Find this called out by the green arrow in the last picture.

Hitting the More control brings up the Alexa app’s main menu, as shown next.

Screenshot of the Alexa app on iPadOS, showing the main menu, with the -Add a Device- item highlighted.
Alexa app on iPadOS, showing the main menu, with the -Add a Device- item highlighted.

8. Tap the  Add a Device  Item 

Visit the next page in the process by tapping the  Add a Device  menu item (left top of the screen), highlighted by the green arrow in the last picture.

This brings up the   Setup->What type of device are you setting up?  screen, as shown next.

Picture of the Alexa app on iOS, displaying its -What Type of Device are you Setting Up- page, with the -Echo- device type highlighted. Alexa Echo Studio Setup.
Alexa app on iOS, displaying its -What Type of Device are you Setting Up- page, with the -Echo- device type highlighted.

9. Tap the Amazon Echo Device Type

Tapping the Amazon Echo item brings up the first Setup screen for Echo devices, as shown next, where you pick which model of the Echo you’re connecting.  In this case, we want to connect an Echo Studio device.  So, we’ve pointed out that option with a green arrow in the next picture.  You may have to scroll down a bit to see this option on your mobile device.

Screenshot of the Alexa App on iPadOS, displaying the -Which device would you like to set up- page, with the Echo Studio speaker highlighted.
The Alexa App on iPadOS, displaying the -Which device would you like to set up- page, with the Echo Studio speaker highlighted.

10. Tap the Echo Studio  Device Item to Continue with Alexa Echo Studio Setup

Touching the Echo Studio device brings up the Is your Echo Studio Plugged In and Displaying an Orange Light?  screen, as shown next.

Screenshot of the Alexa app on iPadOS, displaying the -Is your Echo Studio plugged in- page, with the -Yes- bar highlighted.
The Alexa app on iPadOS, displaying the -Is your Echo Studio plugged in- page, with the -Yes- bar highlighted.

11. Tap the Yes Bar in the Alexa App

Next. pick up your mobile device again and go back to the Alexa app.  You should see the screen pictured in Step 8 above.





Tap the blue Yes bar shown there.

This starts the Alexa app scanning for new Amazon Echo devices to set up, as shown next.

Screenshot of the app, showing its -Select Amazon Echo- page while it searches for Echo devices to set up. Alexa Echo Studio Setup.
The app, showing its -Select Amazon Echo- page while it searches for Echo devices to set up.

Now at this point, the app is waiting to hear from the device you’re setting up.   It will hear it then, when you place that device in Setup mode.

If your Echo Studio is indeed in Setup, then after a brief pause, Alexa should find it, as ours did, and display it in a found-devices list, as shown next.

Screenshot of the Alexa app on iPadOS, displaying the -Select your Amazon Echo- page, with an Echo Studio speaker listed and highlighted.
The Alexa app on iPadOS, displaying the -Select your Amazon Echo- page, with an Echo Studio speaker listed and highlighted.

If Alexa does not find your Studio, make sure you have Bluetooth turned on in your mobile device that’s running the app.  Turn that on, and then check again that your speaker displays the orange light ring.

Note that the Alexa Echo Studio only stays in Setup mode for several minutes, and times out after that.  Should timeout happen, then unplug the speaker from power for a few seconds and plug it back in.  This should re establish Setup mode.

12. Tap the Listed Amazon Echo Studio to Set Up

In this demo, we tap the Echo Studio-2RK device, pointed at by the green arrow in the last picture above.

This brings up the  Select your Wi-Fi Network   page, as shown next.

Just prior to the app showing this screen, it runs a WiFi scan from the device you chose, for in-range WiFi networks that said device sees.  Then, it’s this list that the app displays for you.

Screenshot of the app, displaying the -Select Your Wi-Fi Network- page, with a 5 Gig network highlighted.
The app, displaying the -Select Your Wi-Fi Network- page, with a 5 Gig network highlighted.

13. Choose the WiFi Network To Setup your Echo Studio Alexa With

Tap the WiFi network you want your speaker to sign into.  In our case, we’re choosing the 937T681J4059H_5G_Guest network.  That one is pointed out by the green arrow in the last picture.

14. Enter the Password for That WiFi Network

Tapping a WiFi network may ask you to enter the password for that network.  Skip down to the next step if you don’t see this prompt.

The app may not prompt you, if you’ve previously saved this network’s information to your Alexa account.  This is true for us in this scenario.  So Alexa did not ask us for the password.

But if a password entry screen does appear, type in the right WiFi password for the WiFi network you chose, and then move ahead to the next step.





15. Wait for your Echo Studio to Connect to your WiFi Network

While your speaker tries to set itself up on the WiFi network you picked above, the app shows the Connecting your Echo to Wi-Fi screen, as pictured next.

Screenshot of the app displaying its -Connecting your Echo Studio to WiFi- page. Alexa Echo Studio Setup.
The app displaying its -Connecting your Echo Studio to WiFi- page.

After some seconds, and if all goes well, you see the following screen.  This shows that the Echo Studio successfully connected to your WiFi network.

Screenshot of the Alexa app on iPadOS, displaying the -Your Echo Studio is now connected- Page, with the -Continue- bar highlighted.
The Alexa app on iPadOS, displaying the -Your Echo Studio is now connected- Page, with the -Continue- bar highlighted.

Also, the Echo Studio then makes a chime sound, and announces that it’s ready for use.

But if it does not connect and you get errors, follow any instructions that the app displays.  If you entered the wrong WiFi password, the app prompts you to re-enter it.

Now if the problem connecting is network related, you may have to troubleshoot that issue on your router.  In that case, once you’ve fixed the problem, try rerunning this routine again.  We recommend that you close the Alexa app and start it anew first.  Then, again, be sure that your Alexa Studio is in Setup mode before doing the setup routine again.

16. Tap the Blue Continue Bar to Continue with Alexa Echo Studio Setup

Touching Continue brings up the  Choosing a Location for your Echo Studio page, as pictured next.

Screenshot of the app displaying the -Choosing a location for your Echo Studio- page, with the -Continue- bar highlighted.
The app displaying the -Choosing a location for your Echo Studio- page, with the -Continue- bar highlighted.

17. Tap the Blue Continue Bar

Touching Continue then brings up the Which room is your Echo Studio In prompt, as shown next.

Screenshot of the app displaying the -Which Room is your Echo Studio In- prompt. Alexa Echo Studio Setup.
The app displaying the -Which Room is your Echo Studio In- prompt.

18. Choose the Room Where you will Place the Echo Studio

In this demo, we tapped the Bedroom choice, as shown in the next picture.  Note that a check mark appears to the right of the choice you make once you touch that selection.

Screenshot of the app displaying its -Which Room is your Echo Studio in- page, with the -Bedroom- choice checked, and the -Continue- bar highlighted.
The app displaying its -Which Room is your Echo Studio in- page, with the -Bedroom- choice checked, and the -Continue- bar highlighted.

19. Tap the Blue Continue Bar to Continue with Alexa Echo Studio Setup

Touching the Continue bar then brings up the Where is your Echo Studio  page, as shown next. The system is prompting you for the street address where you’ll be using your speaker, as shown in the next screenshot.

Screenshot of the app displaying the -Where is your Echo Studio- page, with the street address blanked out.
The app displaying the -Where is your Echo Studio- page, with the street address blanked out.

20. Tap the Street Address where you Want your Echo Studio to Work

The default address, which is filled in, and which we covered up in our demo, is shown above.  This is the street address listed on your Amazon account.

Review this address, and if it’s the one you want, tap it.  A check mark should then appear to the right of it, as shown in the next picture.

Screenshot of the app displaying the -Where is your Echo Studio- page, showing the street address covered up but checked, and the -Continue- bar highlighted. Alexa Echo Studio Setup.
The app displaying the -Where is your Echo Studio- page, showing the street address covered up but checked, and the -Continue- bar highlighted.

If the listed street address is not not the one you want, then tap the Enter a new address link on this screen, and follow the directions to type in the street address you want.

Once done, the system returns you to this screen, except that now, the correct street address for your speaker should be listed.  Tap that, and then move on to the next step.





21. Tap the Blue Continue Bar 

Once you bump the Continue strip, your Amazon Alexa Echo Studio is now setup, and ready to answer voice commands. The system confirms this by displaying the following screen.

Screenshot of the app displaying its -Setup Complete- page, with the -Done- bar highlighted.
The app displaying its -Setup Complete- page, with the -Done- bar highlighted.

22. Tap the Blue Done Bar to Continue with Alexa Echo Studio Setup

Then, the Alexa app takes you back to its Home screen, as shown next.

The Alexa app on iPadOS, Home screen.
The Alexa app on iPadOS, Home screen.

You may now close the Alexa app if you wish.

23. Test Out your Echo Studio

Your Amazon Echo Studio is now ready to accept and perform voice commands and answer questions once the lighted orange ring darkens after setup.  Try asking it some questions like:

  • What’s the weather?
  • What time is it?
  • Give me my flash briefing.
  • How are you today?
  • Sing happy birthday.
  • Tell me a joke.

… and so on. Of course, be sure to precede each question with your Echo wake word.  The default is Alexa.  Or it could be Computer, Amazon, or Echo if you changed it.

24. Done with Alexa Echo Studio Setup !

Enjoy this Alexa device.  It’s a truly great sounding streamer, especially when you pair it with another Echo Studio to form a stereo pair, or to a decent Bluetooth speaker.

Other Posts About the Echo Studio Device

  1. How to Reset Alexa Echo Studio, Hard Factory Reset
  2. Echo Studio Buttons Guide, Meanings Functions Codes

Related Posts to Alexa Echo Studio Setup

  1. Google Home Setup Instructions for their First Speaker
  2. Ultimate Ears Wonderboom Setup Instructions
  3. Gosund Mini WiFi Outlet Setup Instructions
  4. Echo Spot WiFi Setup Instructions
  5. Alexa Echo Dot WiFi Setup Instructions

References for Alexa Echo Studio Setup Instructions

  1. Echo Studio Alexa Official Product Page at Amazon.com

Revision History

  • 2020-09-08: First published.