Amazon Echo Dot Action Button — Explained

Top view of the Echo Dot 3rd Generation speaker as it boots.

The Amazon Echo Dot Action Button gives access to some key assistant functions. For example, you can reset the device with it. Plus, you can summon the speaker as well as stop ringing alarms from the speaker. Quite the useful multi-function button, for sure. So here, we define this button, and explain how it works, and for what purposes.

Amazon Dot 2 smart speaker, top view, showing the Action button highlighted.

Amazon Echo Dot Action Button

All Amazon Dots we know of have this round Action button. It usually has a raised, white dot in its recessed center. The later speakers have this, but in a raised circle format.

We find this button at three o’clock in this example. See it in the next picture.

An Amazon Dot 3 speaker, top view, showing the Action button highlighted.

Get the Amazon Echo Dot’s Attention with the Action Button

Quickly press and release the Action button to wake up the Amazon Dot instead of calling out Alexa’s name. Raise her in this way when you must be quiet. Or it also works well in loud places, and the speaker can’t hear the wake word. Note that if you switch OFF the microphone, then short pressing this button has no effect. But be aware that long pressing the button puts the speaker into Setup mode. Then once that happens, you’ll have to run through the setup routine again to use the speaker once more. So don’t lean too long on the button just to get the speaker to hear you.

Stop Amazon Dot Alarms and Timers from Sounding

When a timer expires or a set alarm time comes up, some kind of alarm sound plays. To stop this sound, you may call out to your Amazon Dot to stop it. Or if you’re close enough, just reach over and quickly press. So you don’t have to say a word to get speaker attention.

Reset the Amazon Echo Dot with the Action Button

You can also reset Amazon Dots to factory default settings with this button. Press it and gently hold in for ten seconds. Release when reset occurs. Reset usually begins in five to seven seconds.

The Action Button Adjusts Brightness of Lights Too… Well, Sort Of…

Finally, there is a light sensor beneath the white dot on this triple duty button. This “electric eye” detects the amount of light shining on the speaker. Then it adjusts speaker ring brightness accordingly. The brighter the surrounding light, the brighter the speaker glows whenever it lights. The darker the area, the dimmer it glows. You may notice that covering this dot with a fingertip dims the lamps on the speaker.