Picture of the Honeywell RTH9580WF Smart Thermostat, displaying the WiFi Setup screen.

Change WiFi Network on Honeywell RTH9580WF

You might need to connect your Honeywell RTH9580WF smart thermostat (t-stat) to a new WiFi network.  Perhaps you moved the t-stat, and  the WiFi it worked with before went out of range.  So in this post, we cover just how you do that, how to change WiFi network on Honeywell thermostat RTH9580WF.





Then maybe, you have changed the name of your home WiFi network.   Or perhaps you changed your WiFi network router.  But then again, you may want to connect the t-stat to a new access point in your home. For all of these tasks, you can do so by following the routine below.

Picture of the Honeywell RTH9580WF smart t-stat, front view after initial setup.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF smart t-stat, front view, after initial setup.

Change WiFi Network on Honeywell Thermostat RTH9580WF

For sure, Honeywell really improved the WiFi setup routine for this smart t-stat.  Indeed, you no longer must connect to it via a tablet to update the WiFi network settings.  But instead, you can now set up WiFi via the RTH9580WF touchscreen menus.  Here’s how.

1. Enter WiFi Setup mode

First of all, switch from normal to Wifi setup as follows.  Press the Menu button at the top right of the Home screen, as shown above.

Then, scroll with the arrow keys at right, through the main menu.  Stop scrolling when you see the Wi-Fi Setup button, as shown next.

Picture of the t-stat menu, with the Wi-Fi Setup button circled.
Honeywell RTH9580WF WiFi smart t-stat menu, Wi-Fi Setup button circled.

Next, press the Wi-Fi Setup button, circled in red in the above pic.  The WiFi setup screen then displays, as shown next.  Note that we have blanked the t-stat MAC address and CRC values, for security.  Also note that normally, this screen shows the status of the connected WiFi network.  But here, the OurHouse1 network is not in range (no signal).  So we’re going to discard the OurHouse1 info. Then, we will replace it with an in-range WiFi network in the steps below.

Picture of the RTH9580WF , displaying the Wi-Fi Setup screen.
Honeywell RTH9580WF smart t-stat , displaying the WiFi Setup screen.

2. Disconnect the T-stat from its Current WiFi Network

Then press the Disconnect from Network button.  The WiFi Network Disconnect Confirmation screen appears, as follows.

Picture of the Honeywell RTH9580WF smart t-stat , displaying the WiFi Network Disconnect Confirmation prompt screen.
Honeywell RTH9580WF smart t-stat, displaying the WiFi Network Disconnect Confirmation prompt screen.

Press the green Yes button.  After a pause, the system lets you know that it disconnected from the old WiFi network, as shown next.

Change WiFi network on Honeywell thermostat RTH9580WF. Picture of the Honeywell RTH9580WF WiFi smart t-stat , displaying the Network Disconnected screen.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF WiFi smart t-stat , displaying the Network Disconnected screen.

Then, press the green OK button in the lower right corner of the screen.  After the press, this takes you back to the main menu, as shown next.





3. Find the Wi-Fi Setup Button to Change WiFi Network on Honeywell T-Stat

From there then, use the UP and DOWN arrow keys to scroll through the menu to the Wi-Fi Setup button.

Picture of the Honeywell RTH9580WF WiFi smart t-stat menu, with the WiFi Setup button circled.
Honeywell RTH9580WF WiFi smart t-stat menu, with the WiFi Setup button circled.

4. Tap the Wi-Fi Setup Button

Then, press the red-circled Wi-Fi Setup button.  When no network information resides in the t-stat, pressing Wi-Fi Setup initiates a scan for in-range WiFi networks.  Then, a brief message displays, indicating that the network scan is in progress.  Then, the RTH9580WF lists the in-range WiFi networks it found, on its Select Wi-Fi Network screen, as follows:

Change WiFi network on Honeywell thermostat RTH9580WF. Picture of the Honeywell RTH9580WF smart t-stat , showing the Select WiFi Network screen.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF smart t-stat , showing the Select WiFi Network screen.

5. Find the WiFi Network you Want

Then, tap the network in the list to which you wish to connect the smart t-stat.  So in our case, we’re connecting to the 937T681J4059H_2G wireless network.  The WiFi Password Entry screen then appears, as follows.

Picture of the t-stat , showing the WiFi Network Password Entry screen.
Honeywell RTH9580WF smart t-stat , showing the WiFi Network Password Entry screen.

6. Enter WiFi Password if Asked For

Next, use the displayed virtual keyboard to enter your password.  Then, to enter numbers and punctuation characters, press the ?123 key.  Why?  Because this  switches the keyboard to number entry mode.

The password characters appear as you type them. So do this when no non-trusted folks are looking.





7. Connect to the WiFi Network you Picked

When you’ve finished entering the password characters, press the green Done button.  This WiFi t-stat then tries to connect to the selected WiFi network.  While connecting, it displays the following screen while it does so.

Picture of the smart t-stat, displaying the Connecting To WiFi Network screen.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF smart t-stat, displaying the Connecting To WiFi Network screen.

Then, if no errors happen, the system connects to the selected WiFi network.  Then it displays the following screen.  It shows the name of the wireless network that the t-stat now connects with.

Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF smart t-stat, showing the WiFi Connection Successful screen.
Honeywell RTH9580WF smart t-stat, showing the WiFi Connection Successful screen.

8. Register your Honeywell Thermostat Online for Remote Access

Next, press the green  OK  button.  Then, the Register Online for Remote Access screen then displays, as shown next. Now perhaps you already registered your WiFi t-stat.  If so, then you need not register it again, so long as you have not unregistered it.  Note that connecting to a new WiFi network does not unregister the t-stat.

Picture of the t-stat, showing the Register Online for Remote Access screen.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF smart t-stat, showing the Register Online for Remote Access screen.

Then, press the green  Done  button.  The system then returns to the Wi-Fi Setup screen.  But this time, the connected network info appears, as shown in the next shot.

Picture of the RTH9580WF, displaying the WiFi Setup Screen with the network connected successfully.
Honeywell RTH9580WF smart thermostat, Displaying the WiFi Setup Screen with the network connected successfully,

Next, press the green  Done   button.

Then, the t-stat takes you back to the main menu, as shown below.

Change WiFi network on Honeywell thermostat RTH9580WF. Picture of the Honeywell RTH9580WF WiFi smart t-stat menu, with the WiFi Setup button circled.
Change WiFi network on Honeywell thermostat RTH9580WF. Honeywell RTH9580WF WiFi smart t-stat menu, WiFi Setup button circled.

Then from there, press the Home button at the top left corner of the Main Menu screen.

This takes you back to the Home screen, as shown next.

Picture of the RTH9580WF, front view after initial setup.
Honeywell RTH9580WF smart t-stat, front view after initial setup.

9. Change WiFi Network on Honeywell Thermostat RTH9580WF Done!

Finally, your Honeywell smart t-stat now links to your new WiFi network.  You’ll see that when the outdoor temperature and humidity settings update soon after.





Related Posts to Change WiFi Network on Honeywell RTH9580WF Thermostat

  1. Change Wireless Network on Honeywell Wifi Thermostat RTH8580WF
  2. Set Temperature Range Honeywell Thermostat RTH9580WF
  3. Solving Honeywell WiFi Thermostat Connection Problems
  4. How to Clear Settings on Honeywell Thermostat
  5. Register Honeywell WiFi Thermostat RTH9580WF Online, How To

Other Posts About the Honeywell RTH9580WF Thermostat

  1. Honeywell RTH9580WF WiFi Setup Instructions
  2. How to Change Honeywell Thermostat Temperature Setting
  3. Change Time and Day on Honeywell RTH9580WF Thermostat, How To
  4. Connecting Amazon Echo Dot to Honeywell Thermostats
  5. How to Reset Honeywell Thermostat RTH9580WF

Change WiFi Network on Honeywell Thermostat RTH9580WF: References

  1. RTH9580WF Wireless Thermostat Product Page
  2. Where to buy the Honeywell RTH9580WF Smart Thermostat

Revision History

  • 2020-04-18: Added more tags.
  • 2019-07-11: Tuned the key word targeting for ‘Change WiFi Network on Honeywell’.
  • 2018-04-15: Changed post title and content for better keyword targeting.
  • 2016-12-14: Added more links to the Suggested Reading section.
  • 2016-02-14: Originally published.