JBL Clip 3 Bluetooth wireless speaker, top view, status lamp glowing red.
First, you can charge this mini wireless speaker conveniently via the hidden USB charge port. Here, we give the way to charge JBL Clip 3.
In short: Choose an adequate USB charging adapter. Why this? Because the 3 does not come with this as a standard accessory.
Next, connect a micro USB charge cable between the 3 and that adapter. Then, plug the adapter into a working wall outlet. Finally after a few hours, the speaker fully charges. Then you’ll be able to play it again for up to ten hours before needing to recharge it again.
Now in this demo, we use the RavPower 24 watt dual port USB charger adapter, as we show next. Now this speaker requires 5 volts at 600 milliamps to charge fully. So this adapter is indeed beefy enough for the job.
Then, use a penny or a dime to work open the waterproof seal port cover on the 3. This exposes the micro USB charging port inside.
Then, plug the small end of your micro USB charge cable into the matching micro USB port.
Then, connect the A end of the USB charge cable to the power adapter, as er illustrate next. In this demo, we use a RavPower 24 Watt adapter and an Amazon USB cable.
Plug the adapter into a working AC outlet. In this demo, we plug ours into a surge protector power strip.
The status lamp lights up solid red on the 3 when you connect power. Now there is no battery status gauge however.
The red lamp means that charging is in progress, and it goes out when charging completes. However, there’s no way to tell how far along the charging is on this speaker model.
Battery charging is complete when the solid red lamp goes dark.
Note that unless you snap this flap securely, water could enter the port area. Then this could possibly damage the electronics inside. So, be sure to press the port door closed with enough force for best water resistance.
Finally, we have now fully charged the 3.
Repeat this process every ten to twelve hours of music play. Why? Because this helps keep its battery in top condition.
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…