Bluetooth Speakers

Check Logitech Wonderboom 2 Battery

Gives the check Logitech Wonderboom 2 battery procedure, and also, how to tell if the battery is losing capacity over time.  When you press the right buttons while the speaker is running, it emits one or more sound pulses to tell you how full the battery is, as described below.

Check Logitech Wonderboom 2 Battery: Step by Step

1. First, Power Up the Logitech Wonderboom 2

You won’t be able to read battery level unless the speaker is ON.

The Top of the Logitech Wonderboom 2. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, pointed out by the yellow arrow the last picture.

The small lamp in that button should then light, as we see next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

The -Power-button glowing white.

But as long as there’s some energy in the battery, the speaker should boot.  When it does, move ahead to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Continue with Check Logitech Wonderboom 2 Battery

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next. The Volume Up button is in the center of the plus (+) symbol on the speaker front, and the Volume Down button is found in the middle of the vertical minus (-) symbol, just below the plus symbol.

Front view of the Logitech Wonderboom 2. Showing the -Volume UP- and -Volume DOWN- buttons. Press these to check battery leve.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery level is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

About the Red Power Light

Also, when the Logitech Wonderboom 2 battery level gets critically low, the Power lamp starts flashing red, as shown next.

The red light glowing in the -Power- button. This means that the battery level is getting pretty low. This lamp gives another way to check the charge level.

Press these buttons any time the speaker is ON, to check the battery level.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged Wonderboom plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other Logitech Wonderboom 2 Posts

    1. Bluetooth Pairing Procedure
    2. How to Check Battery
    3. Connect To This Speaker Routine
    4. How to Turn ON
    5. The Watt Rating

References

    1. Official Logitech Wonderboom 2 Support Page
    2. Where to Buy the Logitech Wonderboom 2
admin

Recent Posts

Fix DVD Skipping

We've played digital video discs (DVDs) for nearly two decades now.  Daily watching them has…

40 mins ago

Stop DVD Skipping

We've played digital video discs (DVDs) for nearly two decades now.  Daily watching them has…

47 mins ago

Cleaning Vinyl Kitchen Floors Hints Tips Advice

The following hints, tips advice, and instructions describe cleaning vinyl kitchen floors.  Following these directions…

2 hours ago

Factory Reset Google Home Mini Speaker

Here we cover the Factory Reset Google Home Mini Speaker procedure. Now you might factory…

3 hours ago

Factory Reset Google Home Mini

Here we cover the Factory Reset Google Home Mini procedure. Now you might factory reset…

3 hours ago

How to Reboot Samsung Galaxy J7 Sky Pro Tracfone

In this piece, we run though How to Reboot Samsung Galaxy J7 Sky Pro Tracfone.…

3 hours ago