Gives the Connect JBL Flip 6 Speaker to Alexa procedure. Now this pairing happens between the JBL and Alexa devices directly. So you need not turn Bluetooth on in the mobile device you’re using to set up this connection.
Connect JBL Flip 6 Speaker to Alexa: Step by Step
With your JBL Flip 6 Speaker OFF, run through this routine to connect it to your Alexa device. We use an iPad Air tablet here to set this up.
1. Find the Alexa App on your Mobile Device
Firstly, we find the app on the iPad Air. In this exercise, the app is in a custom folder that we created called Smart Speakers.
2. Run the Alexa App
The app displays its Home screen.
3. Tap the More Item to Continue with Connect JBL Flip 6 Speaker to Alexa
So find the hamburger item in the lower right corner of the screen.
This brings up the Alexa app’s main menu.
4. Tap the Settings Option on the Main Menu
This brings up the Settings screen.
5. Tap the Device Settings Option
Touching Device Settings brings up the All Devices page.
Then from here, choose which Echo device you wish to pair with your JBL Flip 6 Speaker speaker.
6. Tap the Alexa Device you Wish to Connect
This takes you to the device-specific settings screen for the speaker you chose.
In this demo, we pair from our Thomas’s 2nd Echo Dot 4 speaker to our JBL Flip 6 Speaker. So the Dot’s device specific settings screen looks as follows.
7. Tap the Connect a Device Item to Continue with Connect JBL Flip 6 Speaker to Alexa
Then find the Connect a Device option.
This brings up the Setup screen.
At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this speaker will be the one that scans for BT devices.
Note that our Dot speaker found no devices so far. But it will when we turn on put the JBL Flip 6 Speaker into discovery mode.
8. Power Up the JBL Flip 6 Speaker
Bring your JBL Flip 6 Speaker close to your Alexa device to pair. Then power up the JBL Flip 6 Speaker by pressing and releasing the Power button.
9. Place the JBL Flip 6 Speaker into Discovery Mode
Then put the speaker into pairing mode by pressing and releasing the Pairing button.
10. Find the JBL Flip 6 Speaker on the Alexa App SETUP Page
When you put the JBL Flip 6 Speaker into discovery mode, it should then appear in the Alexa app. Find it on the Pair Bluetooth Device… page.
Note that if your speaker does not show up on this page, then try the following…
- Move it very close to the Alexa device.
- Close then restart the Alexa app.
- Then repeat steps 3 through 7 along with step 9 above.
We usually find that this gets the speaker to appear here as it should.
11. Find your JBL Flip 6 Speaker on the Discovered Devices List
See the last screenshot above. The test JBL Flip 6 Speaker speaker is there.
12. Finally, Pair your Alexa with your JBL Flip 6 Speaker
Then pair to the JBL Flip 6 Speaker by tapping the listed speaker on the Pair Bluetooth Device… screen.
Your Alexa speaker then pairs with the JBL Flip 6 Speaker.
The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen.
Note that our Bluetooth speaker now shows as connected. Also, the JBL Flip 6 Speaker makes the Speaker Paired sound (the three ascending guitar notes).
The JBL Flip 6 Speaker now has connection with your Alexa. So its Bluetooth light glows solid white to signal that this pairing is underway.
13. Done with Connect JBL Flip 6 Speaker to Alexa !
At last we can now ask Alexa to play music. Then those tunes will come out of the JBL Flip 6 Speaker. Be sure though, to speak to the Alexa device when making requests.
But do not speak to the JBL Flip 6 Speaker directly. Even though it now connects with Alexa, the Alexa is still the speaker that receives voice commands. So talk to that device so it hears you best.
Other JBL Flip 6 Speaker Posts
- Blinking White Light
- JBL Flip 6 Speaker USB
- Why Does My JBL Flip 6 Speaker Keep Turning OFF By Itself
- Speaker Tricks
- Speaker Auto Turn OFF
- JBL Flip 6 Speaker Won’t Connect
- JBL Flip 6 Speaker Adapter
- Keeps Turning OFF