An Echo Dot 4 speaker clock alongside a UE Wonderboom.
This post shows Connect the Logitech Wonderboom 1 to Alexa devices. Since this pairing happens between the Logitech Wonderboom 1 and Alexa directly, you need not turn Bluetooth on in the mobile device you’re using to set up this connection.
With your Logitech Wonderboom 1 powered OFF (status lamp is dark), run through this routine to Connect it to your Alexa Echo, Show, Studio, Input, and Dot models. We use an iPad Air tablet to set this up.
We found the app on the iPad Air as shown in the next shot. In this exercise, the app is in a custom folder we created called Smart Speakers, and pointed at by the arrow.
The app displays its Home screen as we see in the next screenshot.
Find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.
This brings up the Alexa app’s main menu, as shown in the next screenshot.
The Settings option is pointed at by the green arrow in the last photo.
This brings up the Settings screen, as shown in the next screenshot.
Touching Device Settings brings up the All Devices page, as shown next.
From here, choose which Echo device you wish to pair with your Logitech Wonderboom 1.
This takes you to the device-specific settings screen for the device you chose.
In this demo, we’re pairing from our Thomas’s 2nd Echo Dot 4 to our Logitech Wonderboom 1, and so, its device specific settings screen looks as follows.
Find the Connect a Device option pointed at by the green arrow in the last screenshot.
This brings up the Setup screen, as we show next.
At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this Alexa will be the one that scans for BT devices.
Note that our Dot found no devices so far. But it will in the next steps, when we turn on the Logitech Wonderboom 1 and put it in pairing mode.
Bring the Logitech Wonderboom 1 close to your Alexa device to pair, and power up that unit by pressing and releasing the Power button as we show in the next picture.
Put the Logitech Wonderboom 1 into pairing mode by pressing and holding in the Pairing button, as illustrated in the next picture, until you hear the pairing sound.
When you start discovery mode on the Logitech Wonderboom 1, it should then appear in the Alexa app, on the Pair Bluetooth Device… page, as we see next.
Note that if the Logitech Wonderboom 1 does not show up on this page at this point, then try moving it very close to the Alexa device, closing and restarting the Alexa app, and then repeating steps 3 through 7 along with step 9 above. We usually find that this gets the Logitech Wonderboom 1 to appear here as it should.
Then pair by tapping its corresponding entry on the Pair Bluetooth Device… screen, we see in the last screenshot above.
Your Alexa device then pairs with the Logitech Wonderboom 1.
The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.
Note that our Logitech Wonderboom 1 now shows as Connected. Also, it makes the Speaker Paired sound (the ker-plink sound).
Then the Bluetooth light glows solid white to signal that a successful connection is now in effect.
We can now ask Alexa to play music or news, and those programs will come out of the Logitech Wonderboom 1. Be sure though, to speak to the Echo when making requests, and not the Logitech Wonderboom 1. Even though the Logitech Wonderboom 1 is now paired with Alexa, the Echo is still the speaker that hears your voice commands through its internal far field microphones.
Here is our Radio Shack 12-500 Weather Radio Review. Now this radio is one of…
Here we give some methods of Telling That JBL Flip 4 is Charging? Well, this…
We've played PlayStation games with our nieces and nephews for several years. And many of…
The JBL Flip 4 has several buttons and lamps across its top, in two rows. …
We’ve dealt with the problem of electric baseboard heater noise for a decade now in…
Follow this JBL Charge 4 Charging routine, that explains charging the JBL Charge 4 via…