Connect to Wonderboom 1

Explains the connect to Wonderboom 1 procedure, from typical Bluetooth devices like Apple iOS and iPadOS devices. Similar directions work on Android as well.

So start with your speaker OFF (all dark LEDs). Then, follow along to connect to it.  In this demo, we show this on an iPad Air tablet.

Connect to Wonderboom 1: Step by Step

1. Visit the Home Screen on your Source Bluetooth Device

Firstly, press the Home button to get to the  Home   screen.  See our  Home  page as shown next.

2. Find the  Settings  App

We find ours on the second page of the  Home  screen. Most any mobile device these days has some sort of Settings app.  If yours does not, then follow the directions in its manual for connecting to a Bluetooth speaker.

3. Bring up the Settings App

Tap the Settings app icon.

The mobile device then displays the first page of its  Settings  screen.

4. Go to the Bluetooth Settings Page to Continue with the Connect to Wonderboom 1 Routine

Then tap the  Bluetooth  item.

Our  Bluetooth Settings screen then comes up. Note that our Bluetooth is ON here. But the Wonderboom 1 is currently OFF. So it does not show in either the  My Devices  or  Other Devices lists yet.  Why?  Because we’ve not yet connected to it from this device before.  Plus, the 1 is not yet transmitting its connection info.

5. Power On your Wonderboom 1

Turn on the 1 by rapidly pressing and releasing its  Power  button.

The speaker then powers UP.

6. Put your Wonderboom 1 Into Pairing Mode

Then, to see the 1 on your mobile device, start up pairing / discovery mode. For that, press and release the Bluetooth button.

When you press this Pairing button, the speaker makes a distinctive sound a few times. Plus, a light in this button starts quickly blinking white. See this in the last picture above.

7. Find your Wonderboom 1 on your Mobile Device

We found ours here.

8. Next, Connect to Wonderboom 1

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Then your mobile device then connects to the Wonderboom 1 (appears as “WONDERBOOM” in this demo).

The  Bluetooth Settings  screen then changes to show something like the following.

Note that the Wonderboom 1 now appears as connected, as circled inside the green oval in the last picture.

9. Done with Connect to Wonderboom 1 !

Finally, we have now connected our source device to the Wonderboom 1.  So now, Audio content from that device wnow plays on this speaker.

Other Posts About Wonderboom 1

References for Connect to Wonderboom 1

1. 1. Wonderboom 1 Official Support Page
   2. Where to Buy a Wonderboom 1