Bluetooth Speakers

Connect Ultimate Ears Wonderboom 2 Speaker to iPad

This post gives the Connect Ultimate Ears Wonderboom 2 Speaker to iPad directions, to get it playing from your phone, tablet, or other BT device. First, of course, for new speakers, unpack them and make sure that they have some charge in their batteries.  Then, with your speaker turned OFF (all dark top panel LEDs), follow these steps to connect with most any BT source device.  Thus in this demo, we show how this pairing works on an iPad Air 3 tablet. But a like routine works for iPhones, iPods, and Android phones and tablets too.

Connect Ultimate Ears Wonderboom 2 Speaker to iPad: Step by Step

1. Unpack and Charge the Speaker

If this is a new speaker, take it out of the box and remove all wrappings and packing materials.  Then, charge it for several minutes before proceeding, as these can be pretty dead when you first get them.

2. Next, Visit the Home Screen on your Bluetooth Device

Then press the Home button to get to the  Home  page.  See our  Home  screen as shown next on our iPad.

3. Find the iPad  Settings App

We found ours on the second page of the  Home  screen on our tablet.

iPad Home Screen with Settings App Highlighted.

4. Bring up the Settings App

Tap the Settings app icon.

Out test tablet  then shows the first page of its  Settings  screen, as shown in the next screenshot

iOS Settings screen on iPad Air, with Bluetooth turned ON screen showing, and the Bluetooth item highlighted.

5. Go to the  Bluetooth Settings Page to Continue with Connect Ultimate Ears Wonderboom 2 Speaker to iPad

Tap the  Bluetooth  item, as pointed at by the dark green arrow in the last screenshot above.

Our  Bluetooth Settings screen then appears as follows. Note that we switched ON our Bluetooth on this tablet. But since the speaker is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we’ve never connected it with this iPad before.  Plus, the speaker is not yet broadcasting its BT handle info. This looks something like as shown next.

Showing the previously paired Bluetooth devices list on the tablet.

Note in this picture that no Ultimate Ears Wonderboom 2 Speaker appears just yet.

6. Power Up the Ultimate Ears Wonderboom 2 Speaker

Power up the 2 by rapidly pressing its  Power  button.

See this button, pointed at by yellow arrow, in the next picture.

Top view of the Ultimate Ears Wonderboom 2 Speaker, powered ON, with its -Power-button lit.

The speaker then comes on, letting you know this by making a startup sound.

7. Put the Ultimate Ears Wonderboom 2 Speaker Discovery Mode

Now, to see the 2 on your source device, place it into BT pairing mode. For that, press and release the Pairing button, as circled in the next picture.

Top view of the speaker with its Bluetooth pairing button circled.

When you press this Pairing button, the speaker makes an offbeat but cool pairing sound. Plus, a lamp in this button starts fast-flashing white. See this in the last picture above.

8. Find the Ultimate Ears Wonderboom 2 Speaker on Your iPad

See the picture next. We found ours, as pointed at by the yellow arrow in the next picture.

iPadOS Bluetooth Settings page, showing the Ultimate Ears Wonderboom 2 Speaker as found.

9. Connect To It

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your device then pairs with the Ultimate Ears Wonderboom 2 Speaker (appears as “WONDERBOOM 2” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Showing the Ultimate Ears Wonderboom 2 Speaker as paired on the tablet.

Note that the speaker now shows as paired, as pointed at by the yellow arrows in the last picture.

10. Done with Connect Ultimate Ears Wonderboom 2 Speaker to iPad !

We have now successfully linked this Bluetooth speaker to an iPad Air 3 tablet device.  So now, audio output from that smart device now plays on this speaker, which is what you want. Bluetooth set up like this works with most other Bluetooth source devices as well.

Other Ultimate Ears Wonderboom 2 Speaker Posts

    1. Not Charging Fixes
    2. When Power Button Is Not Working
    3. How to Connect to iPhone
    4. How to Check Battery
    5. Not Pairing Problems Resolved

References for Connect Ultimate Ears Wonderboom 2 Speaker to iPad

    1. Official Ultimate Ears Wonderboom 2 Speaker Support Page
    2. Where to Buy the Ultimate Ears Wonderboom 2 Speaker
admin

Recent Posts

Radio Shack 12-500 Weather Radio Review

Here is our Radio Shack 12-500 Weather Radio Review. Now this radio is one of…

41 mins ago

Telling That JBL Flip 4 is Charging

Here we give some methods of Telling That JBL Flip 4 is Charging?  Well, this…

1 hour ago

How to Fix Scratched PS3 Disc

We've played PlayStation games with our nieces and nephews for several years. And many of…

1 hour ago

JBL Flip 4 Buttons Meaning

The JBL Flip 4 has several buttons and lamps across its top, in two rows. …

2 hours ago

Electric Baseboard Heater Noise Fixes

We’ve dealt with the problem of electric baseboard heater noise for a decade now in…

2 hours ago

JBL Charge 4 Charging

Follow this JBL Charge 4 Charging routine, that explains charging the JBL Charge 4 via…

2 hours ago