Chargers

Echo Dot 3 Charger

Covers the Echo Dot 3 charger specs for the AC adapter that comes with thespeaker.  First,, the US version of this adapter has non folding AC prongs.  It also has a six-foot long affixed cord. Further, it’s light weight for the 15 watt power output. It’s square yet modest width and height. This 12-volt supply fits into a standard power strip or wall outlet.  But it blocks no nearby outlets, as shown next.

The Echo Dot 3 powering up, showing its AC adapter plugged into standard wall outlet.

Yet the Echo Dot 3 power cable silently outputs that 15 watts of power to this latest, 3rd version of the Echo Dot smart speaker.  Also, this supply provides good regulation, allowing the little speaker to play deeper bass, crisp treble, and decent audio volume.

Further, this is not a low-budget AC power adapter. It appears well built.  Also, it is sealed. It runs with little heating even at higher volumes.  Plus, it gives off little if any RFI and EMI noise. But while not built for repair, the low cost of this switching supply makes fixing these a relic exercise.

Amazon power adapter, model # GP92NB, for the Echo Dot 3. Showing its plug and specs label side.

 

The Echo Dot 3 Charger: The Details

Echo Dot 3rd Generation charger. Model: GP92NB. LO P/N PA-1150-9ABN. Input: 110-240 volts, 50-60 Hz., 0.5 Amps Max. Output: 12 volts at 1.25 Amps. UL Listed: 9T54. CAN: ICES-3(B)/NMB-3(B) AC Adapter. Made in China(P). I.T.E. Power Supply E132068. Polarity: Positive center on the DC output “barrel” plug.

Our Echo Dot 3rd generation smart speaker AC charger, showing its DC output barrel connector against a ruler.

Furthermore, the charger’s DC output connector, the metal barrel part, is roughly 10 mm long.  It has an outer diameter of about 4 mm.

The Echo Dot 3 charger cord. Showing its DC output barrel connector, top view, against a ruler.

The size of the positive lead hole at the top of the barrel plug is roughly 2 mm.  Note, that this is a bit smaller than the 21 watt and larger versions of this power supply.

Finally, the chargers for the 2nd gen Echo (21 watts) and echo dot 3rd gen charger (15 watts) look similar.  But you can’t swap them.  This is due to center hole size difference.  Also, there’s the DC output voltage on the 21 watt version being 15 volts.  But on THIS charger, it’s 12 volts. So, you cannot use this adapter useless with the Echo 2.

This charger, including its cable and connector, weighs around 4 ounces.

Echo Alexa Dot gen 3 speaker AC charger, plugged into speaker back.

Other Posts About the Echo Dot 3

    1. Echo Dot 3 Buttons and Ports Guide, Layout, Purpose, How to Use
    2. How to Set Up Echo Dot 3rd Generation
    3. Change Echo Dot Wake Word, How To
    4. Use Echo Dot as Bluetooth Speaker, How To

References

    1. Echo Dot 3 Official Product Page
    2. Where to Buy an Echo Dot 3 Charger
admin

Recent Posts

Defrost Freezer Fast With Heat Gun

Gives a safe routine to defrost a freezer fast with a heat gun. now a…

10 hours ago

JBL Clip 3 Charging

You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…

10 hours ago

JBL Charge 3 Charger Adapter Specs Type and Description

The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…

13 hours ago

Panasonic NN SN778 Review

We review the Panasonic model NN-SN778 here. Now it comes packed with high power output. …

14 hours ago

How to Set Honeywell Thermostat Temperature Limits RTH9580WF

The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…

1 day ago

How to Check JBL Speaker Battery Go 3

To check battery on the JBL Go 3 speaker, the status lamp tells about the…

1 day ago