Picture of the Honeywell RTH9580WF Smart Thermostat, displaying the Restore Factory Defaults confirmation screen.

Honeywell RTH9580WF Thermostat Reset Instructions

These Honeywell RTH9580WF reset instructions clear all user changed settings in this thermostat.  Resetting also erases lock screen passwords and screen color changes et al. Resetting restores it to factory default condition.  You reset by following the routine below. We suggest this reset Honeywell thermostat settings action when fixing smart thermostat issues as well.  Why?  Because resetting rules out the likelihood that wrong settings are causing the t-stat to act strangely.  The problem often goes away after reset.

Keep in mind though, that after reset, the RTH9580WF forgets any user added settings. So you’ll have to enter your WiFi and furnace info again. Also, the RTH9580WF gets rid of custom program schedules you’ve entered.  Thus, resetting returns the RTH9580WF to the default daily heating and cooling schedules. So again, you may need to set them again to your specific needs, if you have any.

Picture of the Honeywell RTH9580WF thermostat. Showing the -Home- screen.
The Honeywell RTH9580WF thermostat. Showing the -Home- screen.

Honeywell RTH9580WF Thermostat Reset Instructions: Prep Steps

Before resetting, get the RTH9580WF booklet. The RTH9580WF package includes this pamphlet.  But if you’ve lost yours, find it online at Honeywell’s web site.

Write down the program in the RTH9580WF if you’ve changed it from the default program.

Then, run through the menus. Record any settings that you’ve changed for your heating / cooling systems. These include filter-change reminders, fan mode, WiFi network data, system type, thermostat name, location, et al.

Honeywell RTH9580WF Thermostat Reset Instructions: Step by Step

1. Go to the Main Menu

Tap the Menu button on the touch screen, as shown above at the top right side of the screen. Then, scroll down by pressing the down arrow key.  Then, stop at the Preferences button, as shown next.

Picture of the -Menu- Screen. Showing the -Preferences- button.
The -Menu- Screen. Showing the -Preferences- button.

2. Tap the Preferences Button 

Tapping the Preferences button brings up that screen.  When you see it, scroll with the down-arrow key. Then stop at the “Restore Factory Defaults” button as circled in red in the next picture.

Picture of the -Restore Factory Defaults- button on the -Menu->Preferences page.
The -Restore Factory Defaults- button on the -Menu->Preferences page.

3. Then, Tap the  Restore Factory Defaults  Button to Continue with Honeywell RTH9580WF Thermostat Reset Instructions

Tap the “Restore Factory Defaults” button.  The RTH9580WF them prompts you to say that you indeed want to hard reset, as shown next.

4. Next, Tap the Green  Yes   Button

WARNING: Tapping this button erases all user settings and info in the RTH9580WF. So DO NOT reset until you know this data.  Don’t go ahead until you’re sure that you can set it up with your furnace / HVAC system details. Get help from a climate control worker if unsure.

Picture of the -Restore Factory Defaults- confirmation screen.
The -Restore Factory Defaults- confirmation screen.

Now if you clearly wish to erase all settings, tap the green Yes button.  Or, press the red No button.

Then, pressing the Yes button, starts the RTH9580WF resetting.  The display shows the  Restoring Factory Default Settings  screen for some seconds, as shown next.

Picture of the -Restoring Factory Default Settings- screen that displays during reset.
The -Restoring Factory Default Settings- screen that displays during reset.

5. The RTH9580WF Resets its Settings to Factory Default Values

After  a few to ten seconds, the screen goes dark, as the RTH9580WF reboots.  Then, the boot screen, showing the Honeywell logo shows next, as seen below.
Picture of the Boot screen after reset.
The Boot screen after reset.

6. The Thermostat Reboots Once Reset Completes

After boot-up, the RTH9580WF gets ready for new settings data from you.  While it works, it shows the Please Wait screen as follows.

Picture of the -Please Wait -screen that appears after reset.
The -Please Wait- screen that appears immediately after reset.

7. Then, the RTH9580WF Enters Setup Mode

Finally, the RTH9580WF asks for some starting data.  Why?  Because it needs this to work after reset, as shown next.

Picture of the Honeywell RTH9580WF thermostat. Showing the -Connect WiFi Network- prompt after reset.
The Honeywell RTH9580WF thermostat. Showing the -Connect WiFi Network- prompt after reset.

Follow the prompts to enter that data about your WiFi network and furnace system.

8. Done with Honeywell RTH9580WF Thermostat Reset

You have now reset your RTH9580WF back to factory default settings.

Other Posts About the Honeywell RTH9580WF Thermostat

    1. Honeywell RTH9580WF WiFi Setup Instructions
    2. Honeywell RTH9580WF Thermostat Manual
    3. Honeywell RTH9580WF Thermostat Review
    4. Reconnecting Honeywell RTH9580WF
    5. Unregister Honeywell Thermostat RTH9580WF

References for Honeywell RTH9580WF Thermostat Reset Instructions

    1. Honeywell Total Connect Comfort Solutions Web Site
    2. Where to Buy the Honeywell RTH9580WF Thermostat

Posted

in

by

Tags: