Picture of the Honeywell 9000 series color touchscreen thermostat, displaying its -Ice- color theme.

Honeywell Thermostat Restart Instructions

Follow these Honeywell thermostat restart instructions if your t-stat behaves strangely.  For example, it might freeze, hang, or fail to operate the furnace.  Or, it refuses to connect to WiFi, or sends no data to the Honeywell Total Comfort Connect servers.  Any of these problems a restart often fixes.

Honeywell Thermostat Restart Instructions

Before doing any thermostat troubleshooting, always try a restart first. Restarting often fixes many problems.  Plus, trying a system restart first may save you from a hard reset of your Honeywell thermostat.

Restarting involves less than hard resetting.  Why?  Because it saves  the onboard settings.  These do not erase in a restart.  So if restarting, you need not figure out how to fill in these settings later.

Remove Thermostat From Wall Mount

Picture of the Honeywell RTH9580WF internet thermostat, being snapped onto wall plate.
Honeywell RTH9580WF Internet Thermostat, being snapped onto wall plate. Honeywell thermostat restart instructions

Your furnace supplies power to most Honeywell thermostats. Also, many later thermostats have a wall bracket.  From this, you detach the thermostat.  Detaching disconnects the thermostat from main power.  If yours is this way, power it off as follows.

If you cannot remove yours like this, then turn off power to the furnace itself.  This should also shut down the thermostat, without having to take it off the wall. See the next section for this power cycling the furnace procedure.

Simply grasp its top and bottom center edges. Then gently pull the t-stat out and away from the wall bracket.

Then, wait a few seconds.

Finally, reattach the thermostat to the wall bracket.  Restart should begin shortly after.





Power Cycle the Furnace to Continue with Honeywell Thermostat Restart

Turn Power Off at Furnace

Perhaps your house has a “hard wired” thermostat. So, it does not simply unplug from the wall.  In that case, stop power to it as follows.

Find the furnace power on / off switch.  This looks like a wall mounted light switch.  Or if no switch, then check at the furnace.  Perhaps the furnace has a power cord plugged into a nearby outlet.  Unplug this to power off the furnace, and thus, the thermostat.

Turn Furnace Power Off at Main Service Panel

But if you have neither a power plug nor switch, then head to the main service panel.  There, find your furnace’s circuit breaker / fuse.

Finally, flip that breaker off or pull the fuse.

Remove Thermostat Battery, if Any

With the thermostat now OFF, remove its battery if your thermostat has one.  Then, check that thermostat screen is blank.

When the furnace / HVAC system is OFF, so too should the thermostat be dark, as shown next.

Picture of the Honeywell RTH9580WF Internet Thermostat, mounted but powered down, snapped onto wall plate.
Honeywell RTH9580WF Internet Thermostat, mounted but powered down, snapped onto wall plate. Honeywell thermostat restart instructions.

Wait Ten to Thirty Seconds to Continue with Honeywell Thermostat Restart

Wait at least ten seconds.  Then reinstall the thermostat battery if you previously removed one.

Turn Power Back On

Then turn furnace / HVAC power back on.  Digital Honeywell thermostats typically complete rebooting in less than a minute.

Picture of the Honeywell RTH9580WF Smart Thermostat, displaying the Boot screen.
Honeywell RTH9580WF smart thermostat, displaying the Boot screen. Honeywell thermostat restart instructions.

Smart thermostats finish rebooting, when they show the indoor temp and current temp setting.  You then may have to reset the thermostat’s clock, for non internet models.

Picture of the Honeywell RTH9580WF Smart Thermostat, front view after powering on.
The Honeywell RTH9580WF smart thermostat, front view after starting up.

So far, we know of no way how to restart a Honeywell thermostat remotely.  Neither the Total Comfort Connect website nor that app for mobile devices, lets you do this as of this writing.  So, you can reboot only if you cut power to the thermostat or furnace.

Related Posts to Honeywell Thermostat Restart Instructions

  1. How to Restart Samsung Galaxy J7 Android Phone
  2. Charge 3 Restart Instructions to Fix Pairing Problems
  3. How to Restart Echo Dot 3rd Generation
  4. Google Home Mini Restart Instructions
  5. JBL Flip 5 Speaker Restart Instructions

References for Honeywell Thermostat Restart

  1. Honeywell My Total Connect Comfort Web Site

Revision Log

  • 2021-08-23: Revised the tags and internal links lists.
  • 2019-03-16: First posted.