Covers how to reboot Google Home Mini smart speaker. Now You may wish to reboot this smart speaker if it starts behaving erratically, becomes non responsive to questions and commands, emits strange noises, breaks up, chirps unexpectedly, and so on. Always try a speaker restart first, as this often clears up many problems, and avoids the unnecessary action of hard resetting your speaker.
If you’re near to the Google Home Mini speaker, you can just disconnect it from AC power, wait ten seconds, and then plug it back in. The unit will complete rebooting in less than a minute.
However, if you’re far away from your speaker, such as upstairs from it, you can issue a reboot command via the Google Home app on your mobile device as follows.
This method depends on you having the Google Home app installed on your phone or tablet, and linked to the same Google account to which your Google Home Mini speaker is linked. Your phone or tablet must also be connected to the same local network as the speaker you’re rebooting. If all of that is in place, then do the following, to effect a remote restart of your speaker.
Firstly, we’re using an iPad Air computer tablet in this scenario. This app is located on page three of our iPad’s home screen, although yours may appear in a different location, depending on how many apps you have installed as well as how you might have arranged them.
Upon running this app, the Google home screen appears, as follows.
Secondly, find this control menu link in the top left corner of the Google Home app Home screen, as pointed at in the previous picture by the pink arrow. This brings up the main menu as shown next.
This brings up a list of your local Google Home devices that have been configured on the current Google account, as shown next for our case.
Do that by scrolling down through the list until you find it. We currently only have one of these. So we found ours straight away, as shown below.
Find this control in the top right corner of its card, pointed at by the purple arrow in the previous picture.
The Mini speaker’s control menu then appears, as shown next.
We’ve circled this in purple in the last picture. The Reboot Confirmation dialog then displays, something like that shown in the next picture.
This initiates a remote reboot of your Google Home Mini speaker, closes the reboot confirmation dialog box, and returns you to the Devices List screen. Your Mini will temporarily disappear from the Devices List screen while it reboots. It will reappear once the restart finishes.
Note the light patterns on your Mini. They should indicate that a reboot is in progress within thirty seconds of your issuing the reboot command, as shown next.
Finally, once the speaker again appears in the Devices list in the Google Home app, and the lights on the speaker have gone out, reboot is complete. Then you can try some commands and questions.
Hopefully, rebooting solves any issues you were experiencing. But if not, you can always try more drastic measures, such as hard resetting your Mini, and then setting it up again. Good luck.
You may wish to reboot your Google Home if it begins behaving erratically, becomes non…
You may wish to reboot your Google Home speaker if it begins behaving erratically, becomes…
You may wish to reboot your Google Home speaker if it begins behaving erratically, becomes…
You may wish to reboot your Google Home if it begins behaving erratically, becomes non…
The JBL Go line of highly portable wireless speakers features several buttons on the right…
The JBL Go line of highly portable wireless speakers features several buttons on the right…