There are a few ways for how to adjust volume on JBL Flip 4 Bluetooth speaker. These depend on the app(s) you’re playing from mostly. Many apps provide volume adjustment controls. But this JBL speaker itself has two buttons for volume control as well. Find these (the + and -) buttons on its top side. Note though, that you cannot set volume with the JBL Connect app.
How to Adjust Volume on JBL Flip 4 Bluetooth Speaker
You can adjust the volume without using any apps, doing it this way, as follows.
1. Lay Out the Speaker such that the Button Controls Face You
See the correct speaker position shown next. There are four buttons in this row. These include the Bluetooth ON / OFF, Volume DOWN (-), Volume UP (+), and the Play / Pause button at the right side of the speaker.
2. Set Volume by Pressing the – and + Buttons
The last pic shows the locations of the volume buttons.
Press the (-) button at the left center of the speaker to reduce the volume. Tap the (+) button at the right center of the speaker to increase the volume.
How to Adjust Volume on JBL Flip 4 Bluetooth Speaker with Siri Voice Commands on iOS
The JBL Flip 4 speaker allows you to activate Siri by pressing the Play / Pause button near the top of the speaker, when paired with an iOS device (iPhone, iPad, or iPod Touch). This feature will not work though, until you change the function of the speaker’s Play / Pause button in the JBL Connect app. We’ll cover how to do that in another post, upcoming. Press that button, and you get the screen on your iOS device shown in the last picture.
Next is an example of giving Siri a voice command to set the volume to half (50 percent).
At any rate, once you’ve changed the Play / Pause button into a Siri control button, briefly press that button to get Siri’s attention. Then ask her to raise and lower the volume as follows.
Next is an example of Siri responding to a voice command to set the volume to FULL (100 percent).
Siri currently understands one scale for volume adjustment: 0-100 percent. Example commands follow. Say these after you’ve pressed the Play / Pause to wake her up.
- Set volume 0 [muted].
- Volume 0.
- Set volume 10 [Ten percent].
- Set volume 10 percent.
- Volume 10.
- Set volume 76 percent.
- Volume 76.
- Set volume 100 [One hundred percent, full volume].
There are also shortcut commands for minimum and maximum volume setting, as in:
- Mute. [Sets the volume to zero percent, minimum, muted state.]
- Half volume. [Adjusts volume to fifty percent, or half of full.]
- Set volume full. [Sets speaker volume to maximum, 100 percent.]
- Set volume max. [Sets speaker volume to maximum, 100 percent.]
- Volume half. [Adjusts volume to fifty percent, or half of full.]
- Volume minimum. [Sets the volume to zero percent, minimum, muted state.]
How to Adjust Volume on JBL Flip 4 Bluetooth Speaker on Bluetooth Source Device
You can adjust volume with the controls on the paired device as well.
Further, you can do the same with paired Android devices as well. However, we found that volume adjustments on the speaker do not change the volume setting on our Samsung Galaxy J7 Sky Phone Pro. For this phone, the volume buttons on the speaker seemed to adjust the volume of the amplifiers on the speaker itself, and not the phone volume. We discovered distortion in the speaker, with its volume set to half while the phone volume was at full (100 percent). So, just be aware of this so you can avoid “over driving” the JBL Flip 4 with your Android device.
In this demo though, we’re playing YouTube content on our iPad Air, and streaming to the JBL Flip 4 via the Bluetooth connection.
1. Pair your JBL Flip 4
We’ll add posts presently that show how to pair the JBL Flip 4 with a source Bluetooth device.
2. Begin Playing a Music Source
Start streaming an internet radio station, a song from youTube or Spotify, or an Audible book. In this demo, we streamed YouTube audio to our Flip 4 JBL Bluetooth speaker, as shown next.
3. Use your Source Mobile Device’s Volume Control Buttons to Adjust the Volume of the JBL Flip 4 Bluetooth Speaker
See this done in the next picture.
Note the purpled arrowed volume setter square with a speaker inside of it in the last picture.
Also note that the volume change you hear on the JBL Flip 4 lags by a second or so. Why? Because of the latency (delay) of the commands going across the Bluetooth airwaves to the speaker.
Again, we’re not covering here how to set volume for individual apps. So, we leave figuring out how to do this an exercise for the reader.
Related Posts to How to Adjust Volume on JBL Flip 4 Bluetooth Speaker
- How to Adjust Volume on Google Home Mini
- Adjust Volume on UE Wonderboom Speaker Instructions
- How to Adjust Volume on JBL Charge 3 Speaker
- Adjust Volume on Amazon Echo 1st Gen, How To
- How to Adjust Volume on JBL Flip 3 Bluetooth Speaker
Other Posts About the JBL Flip 4 Bluetooth Speaker
- How to Charge JBL Flip 4 Wireless Bluetooth Speakers
- JBL Flip 4 Buttons Meaning, Lighted Buttons Described
- How to Pair JBL Flip 4 with Victor Reader Trek
- How to Tell if JBL Flip 4 is Charging
- JBL Flip 4 Pairing Instructions, Pairing Flip 4 JBL Speaker
- Waterproof Bluetooth Speaker, JBL Flip 4, on Crutchfield.com
- JBL Flip 4 Portable Bluetooth Speaker Official Product Page, on JBL.com
- Review of the JBL Flip 4 Bluetooth Speaker, on PhoneArena.com
- 2019-04-23: Added tags, deleted ad scripts, and shortened post URL.
- 2018-05-17: First published.