You can charge JBL Clip 2 conveniently via the hidden USB charge port. Here, we run through how to charge the JBL Clip 2 for these beach-ready wireless speakers.
In short: First, choose a strong enough USB charging adapter. Why this? Because JBL does not include this with the Clip 2 as a standard accessory.
Next, connect a micro USB charge cable between the Clip 2 and that adapter. Then, plug the adapter into a working wall outlet. Finally after a few hours, your Clip 2 fully charges. Then you can play it again for up to ten hours before needing to charge it once more.
How to Charge JBL Clip 2: Step by Step
1. Choose Right Size Power Adapter
In this demo, we’re using the RavPower 24 watt dual port USB charger adapter, as shown next. The JBL Clip 2 needs 5 volts at approximately 0.6 amps to charge fully in a reasonable amount of time. So this RavPower USB adapter is indeed beefy enough to recharge the Clip2 with lots of time to spare.
2. Open the Port Cover on the JBL Clip 2
Then use a penny or a dime to work open the waterproof seal port cover on the Clip Twi. This reveals the micro USB charging port inside, as shown next.
3. Power Off your Speaker to Continue with How to Charge JBL Clip 2
Note that the speaker will still charge when turned on and playing. But depending on your charger, it may charge slightly faster when powered down.
4. Plug in the Micro USB Cord to the JBL Clip 2
Then, connect the small end of the cable into the matching micro USB port in the Clip2.
5. Plug the Other End of the USB Cord into your USB Power Adapter
Then, connect the A end of the USB charge cable to the power adapter. Here, we use a RavPower 24 Watt USB charger. We also have the orange USB cable that comes with the Clip 2.
6. Plug the AC USB Power Adapter into a Live Wall Outlet to Continue with How to Charge JBL Clip 2
Connect the RavPower into a working AC outlet. Now in this demo, we plugged ours into a wall outlet in the kitchen.
The status lamp lights up solid red on the JBL Clip 2 when you supply enough USB power. While no battery status gauge shows percentage of charge, te red lamp means that charging is in progress. Then it goes out when charging completes.
7. Let the Clip 2 Charge Until the Red Light Goes Off
Battery charging is complete when the solid red status lamp goes dark.
8. Unplug the USB Charge Cable from the JBL Clip 2
9. Fully Close the Waterproof Port Door
Note that unless you snap this Clip 2 flap securely and completely in place, water could enter the port area. This might damage the Clip 2 electronics inside. So, be sure to close the port door fully, for best water resistance.
10. Done with How to Charge JBL Clip 2 !
So we have now fully charged our JBL Clip 2 wireless Bluetooth speaker.
Finally, repeat this process every seven to nine hours of play time. Doing so keeps the battery in top working order for years to come.