Front view of the JBL Flip 5 speaker package box.
You can recharge the JBL speaker Flip 5 model through the top-panel USB charging port. To summarize how to charge the JBL speaker Flip 5 : First, pick a right size USB power adapter. Why? Because the Flip 5 does not ship with one.
Next, connect the black USB-C cable included between the Flip 5 and the power supply you’re going to use. Next, insert the adapter into a working mains outlet. Finally after two and a half to three hours, your speaker will completely recharge. Then, you’ll have music again for up to twelve hours (about), before you must charge it anew.
We suggest that the charger you use can deliver 15 watts (5 volts at 3 amps). This gives the quickest charging times. Plus, so you can use the cord that comes with this JBL speaker, pick a USB-A charger.
For this demo however, we use the adapter that came with our Charge 3. But though it doesn’t output quite the max current, the Flip 5 still charges in about the same time.
Insert the small end of the black USB-C charging cable into the matching port in the front.
Next, connect the A end of the USB charge cable to your charger of choice.
Then we plug the charger into a working AC outlet.
At least a small part of the battery bar gauge should light up when you connect a charger. Then as charging progresses, more of the bar lights.
Recharging is almost complete when all but the last of the battery gauge lights glow solid. The last one continues flashing though, for a few minutes more while the system tops off the charging.
After that, the battery recharge cycle finishes when the gauge goes out completely.
We have now fully charged our speaker. To further check this, look at the battery indicator when turning it ON afterwards. The entire battery gauge bar should glow. This means that the speaker has indeed fully charged.
The battery gauge bar is to the right on the front panel, as shown in the last picture.
Repeat this recharging every twelve hours of music play, to keep its battery in top condition. We charge ours when the battery indicator shows only one light glowing.
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…
You must know how to set the Echo speaker to pairing mode to connect it…
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…