Bluetooth Speakers

How to Check Sony SRS XB13 Battery

Covers how to check battery on the Sony Extra Bass SRS XB13 wireless BT speaker, and also, how to know if the battery is charge holding capacity is decreasing over time.

How to Check Sony SRS XB13 Battery, Current Charge

1. First, Turn ON the XB13

You won’t be able to read battery charge status unless the speaker is ON.

Power Button on the Sony SRS XB13 Bluetooth speaker.

To turn on the speaker, press and release the Power button, pointed at by the green arrow in the last picture. It’s the button farthest to the left on the button panel.

The little lamp right above the Power button should then light up green, as shown next, and the speaker may make a two-beep sound if it pairs to a nearby device.  If it does not turn on, then the battery could be completely dead.

The -Power- lamp glowing on the speaker.

But as long as there’s some juice in the battery, the speaker should power up.  Then when it does, move ahead to the next step.

2. Look at the CHARGE Lamp on the XB13

Note that this speaker has no battery gauge to communicate exactly how much charge it has left.  But you can at least, tell if the battery is on the verge of going dead by way of the CHARGE lamp. When the battery is not super low, this lamp is dark when the speaker is running. But when the unit has very little charge left, the CHARGE lamp flashes orange during play.

E.g. The next picture shows the lamp location, just below and to the left of the Power button.

Sony SRS XB13 CHARGE lamp glowing.

How to Check Sony SRS XB13 Battery, Overall Condition

When the speaker is new, and using a full power USB charger, the battery charge time is about four and a half (4.5) hours to reach a full charge.

And, the fully charged battery should last for around sixteen (16) hours of play time before going dead, when played at moderate volume levels, five (5) playing hours when you listen at full volume.

A sign of a bad battery, is that it goes dead too fast. Or it takes too little or too much time to fully charge. So if you fully charge your speaker, but it only plays for under twelve hours before dying, its battery may be headed toward permanent depletion, and thus, unable to hold a full charge anymore.

If the SRS XB13 battery takes longer than six hours to completely recharge, this could also suggest a failing battery.  It might mean too, that the charger you’re using is not tough enough to recharge the speaker in the specified charge time of 4.5 hours. So test this by using a different but known-good charger.

Also, ballooning charging times might happen because your charge lead is too thin.  So for best results, we advise using a full-current USB cord (one that easily carries 2.1 amps). 

Other Posts About the Sony SRS XB13

    1. Sony SRS XB13 Charge Time for Full Recharging
    2. Bluetooth Pairing Instructions for the Sony SRS XB 13
    3. Sony SRS XB13 Replacement Charger Type
    4. Sony SRS XB13 Not Charging, How to Fix
    5. How to Hard Reset Sony SRS XB13 Portable Speaker

Related Posts to How to Check Sony SRS XB13 Battery

    1. How to Check Sony SRS XB12 Battery
    2. How to Check Sony SRS XB10 Battery
    3. How to Check Sony SRS XB01 Battery
    4. Checking the Battery in the Sony SRS X11 Cube Speaker
    5. How to Check Battery on Ultimate Ears Wonderboom 2 Speaker

References for How to Check Sony SRS XB13 Battery

    1. Sony SRS XB13 Product Page at Sony.com

Change History

    • 2022-08-18: First published.
admin

Recent Posts

How to Set Sleep Timer on Google Home Speaker

Firstly, the original Google Home speaker has a sleep timer that you can set and…

27 mins ago

JBL Flip 4 Speaker Charging Instructions

Follow these JBL Flip 4 speaker charging instructions for longest play using the hidden USB…

1 hour ago

JBL Flip 4 Speaker Specs Specifications

Here, we list JBL Flip 4 speaker specs specifications.  To summarize, these cover the speaker's…

7 hours ago

How to Connect Google Home Mini to Bluetooth

This post shows how to connect Google Home Mini to Bluetooth speakers.  Here, we show…

8 hours ago

JBL Flip 4 Firmware Update

Gives the JBL Flip 4 firmware update procedure.  This routine can take up to thirty…

8 hours ago

Changing Wi-Fi Network on Google Home Speaker

You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…

23 hours ago