The Alexa Echo Studio speaker in Setup mode, displaying its orange light ring.
This post explains How to Connect Alexa Studio to WiFi. Plus, this routine works for brand new Studios as well as used ones that you want to put on another network or account. Note though that in certain circumstances, your Studio may set itself up automatically if the following conditions are met:
After plugging the Studio into mains power, give it a couple minutes, and if it announces that setup is complete, then you’re good to go. But if not, follow the instructions below to get it up and running.
You must have the following at your disposal before attempting to set up the Alexa Studio:
You’ll need to run the Alexa app on a compatible mobile phone or tablet computer. For this demo, we’re using an iPad Air tablet.
None of the Echo devices that we are aware of, come equipped with an RJ45 Ethernet port. So, you may only set them up to the Alexa service through a WiFi network. Further, that network must have internet access.
Get the Alexa app in the Google Play (Android) store, or the App Store (iOS). Download and install the right version for your device, and then log into it with your Amazon account details. If you just created an account, be sure to use those credentials.
If you do not already have an Amazon account for your Studio, then get one at https://amazon.com/ . Follow the prompts there to set one up.
Or, when you run the Alexa app in Step 2 under the How to Connect Alexa Studio to WiFi, Step-by-Step below, and you’ve never signed into the app with a valid account, Alexa will ask you to sign in, as shown next.
There, the app lets you create a new account if you don’t already have one. If you do not, then press the Create a New Amazon Account button in the lower center portion of the login screen. Then, the app walks you through that account setup routine. Note that you must have an account to run the following steps.
Turn on Bluetooth on your mobile device. Why? Because the app uses Bluetooth to find nearby Amazon Echo devices in some situations.
Plug the included AC cord into the device.
Plug the other end of that cable into an AC outlet, and plug the adapter into a working outlet. The speaker then boots up, as shown next.
Now, your Studio is probably already displaying its orange light ring on the top of the unit, as shown next. If you see that orange lighted ring, then skip ahead to the next step. Or if not, then work through this step.
After connecting a new Studio to AC power, the unit typically enters Setup mode automatically. You will also hear it announce this. and as mentioned, the ring will turn orange and display a spinning pattern.
But if this is not a new unit, it may not right away go into Setup mode. So in that case, you must reset it. In short, to reset, press and hold the Action button, as pointed out in the next picture, until the Studio starts resetting. After this hard reset, the unit then enters Setup mode.
At any rate, how ever you get it into Setup, once you have it there, move on to the next step.
Find the Alexa app on your mobile device, as we did on the iPad Air tablet, as shown in the next picture.
Tap the Alexa app icon to run it. If this is your first time starting the app, it will prompt you for your Amazon account and password. Again, if you just set up a new account above, log into the app with those account credentials.
Plus, if this is your first Echo device, the app will ask you to set up a new device.
Should the Alexa app prompt, enter your Amazon account details. Doing this will sign you in via the Alexa app. The app then remembers your account information the next time you run it, so that you won’t have to punch in this data every time.
The later versions of the Alexa app are pretty good at detecting new devices nearby. So upon starting the app, you may very well see the following screen.
If so, tap the blue Continue button, and then skip ahead to step 12 below. As seen in that step, the system then prompts you to select the WiFi network.
If the app does not detect your new Studio immediately, it displays its Home screen. We got the Home page right away, since we have other devices on our Amazon account.
But if you see the following screen, then your system is prompting you to set up a new device. So skip ahead to step 7 below.
Find this called out by the green arrow in the last picture.
Hitting the More control brings up the Alexa app’s main menu, as shown next.
Visit the next page in the process by tapping the Add a Device menu item (left top of the screen), highlighted by the green arrow in the last picture.
This brings up the Setup->What type of device are you setting up? screen, as shown next.
Tapping the Amazon Echo item brings up the first Setup screen for Echo devices, as shown next, where you pick which model of the Echo you’re connecting. In this case, we want to connect an Alexa Studio device. So, we’ve pointed out that option with a green arrow in the next picture. You may have to scroll down a bit to see this option on your mobile device.
Touching the Echo Studio device brings up the Is your Echo Studio Plugged In and Displaying an Orange Light? screen, as shown next.
Next. pick up your mobile device again and go back to the Alexa app. You should see the screen pictured in Step 8 above.
Tap the blue Yes bar shown there.
This starts the Alexa app scanning for new Amazon Echo devices to set up, as shown next.
Now at this point, the app is waiting to hear from the device you’re setting up. It will hear it then, when you place that device in Setup mode.
If your Studio is indeed in Setup, then after a brief pause, Alexa should find it, as ours did, and display it in a found-devices list, as shown next.
If Alexa does not find your Studio, make sure you have Bluetooth turned on in your mobile device that’s running the app. Turn that on, and then check again that your speaker displays the orange light ring.
Note that the Alexa Studio only stays in Setup mode for several minutes, and times out after that. Should timeout happen, then unplug the speaker from power for a few seconds and plug it back in. This should re establish Setup mode.
In this demo, we tap the Echo Studio-2RK device, pointed at by the green arrow in the last picture above.
This brings up the Select your Wi-Fi Network page, as shown next.
Just prior to the app showing this screen, it runs a WiFi scan from the device you chose, for in-range WiFi networks that said device sees. Then, it’s this list that the app displays for you.
Tap the WiFi network you want your speaker to sign into. In our case, we’re choosing the 937T681J4059H_5G_Guest network. That one is pointed out by the green arrow in the last picture.
Tapping a WiFi network may ask you to enter the password for that network. Skip down to the next step if you don’t see this prompt.
The app may not prompt you, if you’ve previously saved this network’s information to your Alexa account. This is true for us in this scenario. So Alexa did not ask us for the password.
But if a password entry screen does appear, type in the right WiFi password for the WiFi network you chose, and then move ahead to the next step.
While your speaker tries to set itself up on the WiFi network you picked above, the app shows the Connecting your Echo to Wi-Fi screen, as pictured next.
After some seconds, and if all goes well, you see the following screen. This shows that the Alexa Studio successfully connected to your WiFi network.
Also, the Studio then makes a chime sound, and announces that it’s ready for use.
But if it does not connect and you get errors, follow any instructions that the app displays. If you entered the wrong WiFi password, the app prompts you to re-enter it.
Now if the problem connecting is network related, you may have to troubleshoot that issue on your router. In that case, once you’ve fixed the problem, try rerunning this routine again. We recommend that you close the Alexa app and start it anew first. Then, again, be sure that your Alexa Studio is in Setup mode before doing the setup routine again.
Touching Continue brings up the Choosing a Location for your Echo Studio page, as pictured next.
Touching Continue then brings up the Which room is your Echo Studio In prompt, as shown next.
In this demo, we tapped the Bedroom choice, as shown in the next picture. Note that a check mark appears to the right of the choice you make once you touch that selection.
Touching the Continue bar then brings up the Where is your Echo Studio page, as shown next. The system is prompting you for the street address where you’ll be using your speaker, as shown in the next screenshot.
The default address, which is filled in, and which we covered up in our demo, is shown above. This is the street address listed on your Amazon account.
Review this address, and if it’s the one you want, tap it. A check mark should then appear to the right of it, as shown in the next picture.
If the listed street address is not not the one you want, then tap the Enter a new address link on this screen, and follow the directions to type in the street address you want.
Once done, the system returns you to this screen, except that now, the correct street address for your speaker should be listed. Tap that, and then move on to the next step.
Once you bump the Continue strip, your Amazon Alexa Studio is now setup, and ready to answer voice commands. The system confirms this by displaying the following screen.
Then, the Alexa app takes you back to its Home screen, as shown next.
You may now close the Alexa app if you wish.
Your Studio speaker is now ready to accept and perform voice commands and answer questions once the lighted orange ring darkens after setup. Try asking it some questions like:
… and so on. Of course, be sure to precede each question with your Alexa wake word. The default is Alexa. Or it could be Computer, Amazon, or Echo if you changed it.
Enjoy this Alexa device. It’s a truly great sounding streamer, especially when you pair it with another Studio speaker to form a stereo pair, or to a decent Bluetooth speaker.
This post explains How to Connect Alexa Studio to Internet. Plus, this routine works for…
This post explains How to Connect Alexa Echo Studio to Internet. Plus, this routine works…
This post gives explains How to Connect Alexa Echo Studio to WiFi. Plus, this routine…
Here we give the reconnect Alexa to WiFi procedure. Well, to do that you must…
How to connect Alexa to a Different WiFi network? Well, to do that you must…
Electric Baseboard Heaters Installation is a fun task and we offer help based on our…
