This post shows how to connect to the Sony XB43 Extra Bass BT party speaker with typical Bluetooth devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets.
With your SRS XB43 powered OFF (power light is dark), run through these steps to connect your source device to it. We demo this on an iPad Air tablet computer.
Firstly, press the Home button to reveal the smart device’s Home screen.
We found ours on the second page of the Home screen, as shown next.
Thirdly, touch the Settings app icon.
The smart device then shows the first page of its settings, as shown in the next step.
Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is running here. But since our Sony XB43 is currently shut OFF (is not in Bluetooth connecting mode), it does not appear in the Other Devices list. Also, we don’t see it since we’ve never linked this speaker with our mobile device before.
Additionally, turn on the XB43 by quickly pressing and releasing its Power button. See this, pointed at by the green arrow, in the next picture. It’s the first button on the left on the speaker’s top as you face it.
The 43 then powers up, and its status lamp glows green, as we see in the next picture.
But since our iPad does not know about this speaker, the SRS XB43 will not connect with it automatically.
Now, to see your speaker on your device, place it into discovery mode. To do that, press the Pairing button, and release after a quarter second.
Find this button as we see in the next picture, pointed at by the green arrow. It’s one button to the right of the Power button, again, on the top buttons panel.
Then the speaker announces, “Bluetooth pairing,” in a female’s voice. Also, the Bluetooth Status lamp begins flashing in a pulse-pulse-pause-pulse-pulse-pause pattern.
See the screen shot next. We found our XB43, as pointed at by the green arrow.
Tap the listed speaker in the Other Devices list.
Your mobile device then connects with the SRS XB43.
E.g. The mobile device’s Bluetooth Settings screen then change to look something like the following. Note the now-connected SRS XB43 entry, as pointed at by the green arrows in the My Devices list in the next screenshot.
At last, we have now successfully connected to the XB43 BT speaker with a common mobile tablet device.
Covers the JBL Go 3 Firmware Update Instructions. However, we know of no way to…
We show you here How to Factory Reset JBL Go 3 BT Speaker, to restore…
This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing…
When the JBL Go 3 Speaker Won't Turn ON, this likely means one or more…
Explains How to Put JBL Go 3 Speaker in Pairing Mode. So first, turn on…
When the JBL Go 3 Won't Turn ON, this likely means one or more things…