How to Connect Wonderboom 3 to Phone

This post shows How to Connect Wonderboom 3 to Phone and other iOS devices such as an iPod Touch and iPad. Start with your speaker shut OFF (all dark LEDs). Then, follow along to pair it with a phone.

How to Connect Wonderboom 3 to Phone: Step by Step

1. Visit the Home Screen

Press the Home button to get to the  Home   page.  See our screen as shown next.

3. Find the  Settings  App

We found ours on the second page of the  Home  screen.

3. Bring up the Settings App

Tap the Settings app icon.  Find this pointed at in the last picture.

The phone then displays the first page of its  Settings  screen, as shown in the next screenshot

4. Go to the Bluetooth Settings Page to Continue with How to Connect Wonderboom 3 to Phone

Tap the  Bluetooth  item, as pointed at by the green arrow in the last screenshot.

The Bluetooth Settings screen then appears as follows. Note that our Bluetooth is switched ON here. But since the speaker is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we have yet to pair it with this device for the first time.  Plus, the speaker is not yet transmitting its Bluetooth pair info. See this scenario, that appears as shown next.

Note in this picture that no Wonderboom 3 appears yet.

5. Power On your Wonderboom 3

Turn on the unit by quickly pressing its  Power  button. See this button, pointed out in the next picture.

The Wonderboom 3 then comes on, and announces this with a rising electronic sound.  The Power button also lights up, as we see next.

6. Put your Wonderboom 3 into Pairing Mode

Now, to see the speaker on your phone, place it into BT discovery mode. For that, press and hold the Bluetooth button located as shown in the next picture. It’s on the top, at the twelve o’clock position in he buttons panel. Release the button when you hear the rising plunks sound.

Also, a lamp in this button starts quickly flashing white.

7. Find your Wonderboom 3 on the Phone

See the picture next. We found ours, as pointed out next.

8. Connect With the Speaker

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your phone then pairs with the 3 (appears as “WONDERBOOM 3” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Note that the speaker now appears as paired, as pointed out in the last picture.

9. Done with How to Connect Wonderboom 3 to Phone !

Lastly, we have now successfully paired this speaker with the test cell  phone.  Audio output from that source device now plays on the Wonderboom 3.

Other Wonderboom 3 Posts

1. 1. How to Check Charge
   2. Sync Directions
   3. How to Check Battery
   4. The Wattage Specs

References for How to Connect Wonderboom 3 to Phone

1. 1. Official Wonderboom 3 Support Page
   2. Where to Buy the Wonderboom 3