Left front view of the JBL Flip 5 Bluetooth speaker.

How to Factory Reset JBL Flip 5

Shows how to factory reset the JBL Flip 5 to return it to default factory settings.  Factory resetting erases any earlier paired Bluetooth devices from its memory.  Clearing these stops it from auto pairing to any devices. Also, you might factory reset the the Flip 5 to get it ready for sale or re gifting. Or just to stop it from pairing with devices you no longer have interest in.

How to Factory Reset JBL Flip 5: Step by Step

1. Turn on the JBL Flip 5 

Press and hold the Power button until it lights up.

Picture of the top of the JBL Flip 5, powered OFF, showing the -Power- button.
Top view of the JBL Flip 5, powered OFF, showing the -Power- button.

Then, the Power button lights up along with the battery power scale.  Here, since we’ve paired the Flip 5 with devices before, it does not enter discovery mode.  We know that because the Bluetooth button remains dark, rather than blinking.

Picture of the glowing -Power- button.
The glowing -Power- button.

2. Wait for the Power Up Sound

The JBL Flip 5 plays a rising rock guitar strum when it boots.  Then it is ready for use.





3. Press the Volume UP and Play-Pause Buttons Together to Start the Factory Reset

See the next picture to find the Play-Pause and UP Volume buttons.

Picture of the -Play-Pause- and -Volume-UP- buttons.
The -Play-Pause- and -Volume-UP- buttons.

The Flip 5 JBL then enters factory reset. Note that both the Bluetooth and Power buttons light up gray white for a couple seconds.

Picture of the JBL Flip 5 during reset with all panel lights glowing.
The JBL Flip 5 during reset with all panel lights glowing.

Then after a short pause, the Flip 5 shuts off.  All the lights go off, and it plays the power-down guitar.

4. Check that Factory Reset Worked

Next, power on the Flip 5 again, as detailed in step 1 above.

Now this time, the speaker comes up in discovery mode. Note that the Bluetooth button blinks white to denote this.  When this  button blinks, this means that the Flip 5 has no current pairing.  Indeed, we expect it not to pair to anything after a factory reset.

Picture of the flashing Bluetooth button.
The blinking Bluetooth button.

5. Done with How to Factory Reset JBL Flip 5 !

Factory resetting is now complete. So you may now pack up the speaker for sale. Or pair it again with your favorite devices.  The Flip 5 will no longer automatically connect with any device. Thus to restore that, manually pair the Flip 5 with a tablet or phone.  Then, whenever both the Flip 5 and that device are in range, auto pairing happens again.

Other Posts About the JBL Flip 5

    1. How to Restart JBL Flip 5
    2. JBL Flip 5 Battery Life, How Long the Battery Should Last
    3. JBL Flip 5 Specs, Specifications
    4. How to Check JBL Flip 5 Firmware Version
    5. JBL Flip 5 Buttons Not Working, How to Fix

References for How to Factory Reset  JBL Flip 5

    1. JBL Flip 5 Product Page on JBL.com