Picture of the JBL Charge 4 splashproof speaker, front view, powered On, and showing the lighted battery gauge.

How to Hard Reset JBL Charge 4

These JBL Charge 4 hard reset instructions show how to hard reset your JBL Charge 4 Bluetooth speaker.  Resetting puts the speaker back into its default factory state. Plus, it wipes any earlier paired Bluetooth devices from memory, and so, stops the speaker from pairing to any nearby Bluetooth devices after the reset. Also, hard reset it to get the Charge 4 ready for sale or re gifting.

How to Hard Reset JBL Charge 4, Step by Step

1. Turn on the JBL Charge 4

Press and release the Power button.  It should light up solid white right away.

Picture of the top of the JBL Charge 4, showing the dark -Power- button.
Top view of the JBL Charge 4, showing the dark -Power- button.

Find the Power button, pointed at by the green arrow in the last picture above.

Then, the Power button comes on, as shown next. Here, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth discovery mode by itself. We know that because the Bluetooth button remains OFF, rather than blinking white.  Note the dark Bluetooth button, to the right of the glowing Power button in the next picture.

Picture of the glowing -Power- button.
The glowing -Power- button.

2. Wait for the Power Up Sound

The Charge 4 makes a rising electric guitar strum sound when it powers up, and is ready for factory resetting once this sound finishes.





3. Press the Volume UP and Bluetooth Buttons Together

See the next picture to find the Bluetooth and UP Volume buttons.

Picture of the -Bluetooth- and -Volume Up- buttons.
The -Bluetooth- and -Volume Up- buttons.

The speaker then enters hard reset, as shown in the next picture. Note that both the Power and Bluetooth buttons and the egg shaped ring  that surrounds them.  All of these light up for a couple seconds during reset.  I.e. The ring and both buttons glow gray-white.

Picture of the -Bluetooth- and -Power- buttons along with the enclosing oval ring lit up.
The -Bluetooth- and -Power- buttons along with the enclosing oval ring lit up.

Then after a short pause, the JBL Charge 4 turns off. All lights go off, and it makes the power-down guitar sound.

The next picture shows the JBL Charge 4, powered down.  All buttons are dark.

Picture of the dark control panel on the JBL Charge 4.
The dark control panel on the JBL Charge 4.

4. Check that your JBL Charge 4 Did Hard Reset

Next, power on the speaker again, as we did in step 1 above.  In short, press and release the Power button.





Now this time, after hard reset, our speaker instantly comes up in Bluetooth discovery mode, as shown next. We did not have to press the Bluetooth button first.  Note that the Bluetooth button blinks to let you know that the speaker has entered Bluetooth discovery mode. When this button blinks or is dark, the speaker is not currently paired. Indeed, we expect it not to pair to anything after a hard reset.

Picture of the -Bluetooth- button flashing.
The -Bluetooth- button blinking.

5. Done with How to Hard Reset JBL Charge 4 !

The JBL Charge 4 hard reset is now done. Thus you may now pack it up for sale, or pair it again with your favorite Bluetooth devices.

Since, as noted prior, this speaker will no longer automatically pair with any previously paired, in range Bluetooth device in pairing mode, you’ll need to forget the previously paired JBL Charge 4 listed in the Bluetooth devices section of your source device settings.  Once that’s done, then manually pair the 4 with that device again if you want. Then after that, any time that both speaker and that device have Bluetooth turned on, pairing with automatically take place once more.

Other Posts About the JBL Charge 4 

    1. JBL Charge 4 Charging Instructions
    2. Updating the Firmware
    3. Review and Features
    4. Finding JBL Charge 4 Firmware Version
    5. The Low Frequency Mode Discussed

Related Posts to How to Hard Reset JBL Charge 4

    1. How to Hard Reset JBL Flip 4
    2. How to Hard Reset JBL Xtreme 2
    3. Hard Reset Echo Dot 3rd Gen, How To
    4. How to Hard Reset JBL Go 3
    5. How to Hard Reset JBL Charge 2 Plus

References for How to Hard Reset the JBL Charge 4

    1. JBL Charge 4 Official Home Page at JBL.com

Revision History

    • 2020-08-10: First published.