Lower back view of the JBL Xtreme 2 speaker, showing the closed USB ports door.

How to Hard Reset JBL Xtreme 2

Explains how to hard reset JBL Xtreme 2, for returning this portable Bluetooth speaker to its default out-of-the-box state. Hard resetting restores this speaker to default factory settings, and also clears any earlier paired Bluetooth devices from the unit’s memory. Wiping settings stops this speaker from connecting to any nearby Bluetooth devices after the hard reset. Also, you might hard reset this speaker to get it ready for sale or re gifting, or to stop it from pairing with devices you no longer want it to link up with.

How to Hard Reset JBL Xtreme 2, Step by Step

1. Turn on the JBL Xtreme 2

When this speaker is off, all buttons are dark, including the Power button, as we show next.

Picture of the dark -Power- button on the JBL Xtreme 2 (OFF).
The dark -Power- button on the JBL Xtreme 2 (OFF).

Then, press and release the Power button.  That button should right away light up as shown in the following pictures.  Find the Power button, as shown in the last picture above, pointed at by the green arrow.

Next, the Power button comes on, as shown next. In our case, since we’ve paired the speaker with our tablet before this, it automatically pairs with it now. We know that because the Power button glows solid blue, rather than blinking blue or glowing solid white.  Yours may glow different colors or flash patterns depending on the speaker’s pairing state.

Picture of the -Power- button glowing steady blue, meaning that the JBL Xtreme 2 is ON and paired.
The -Power- button glowing steady blue, meaning that the JBL Xtreme 2 is ON and paired.

2. Wait for the Power Up Sound

The speaker makes a rising electric guitar strum sound when it powers up. The JBL Xtreme 2 is ready for hard resetting after this sound finishes.  If your speaker pairs with an in-range Bluetooth device, you’ll also hear the three rising single guitar notes a few seconds after the startup cord.  No matter though.  In fact, whether or not the speaker pairs with a BT device does not change how you hard reset it.  In either case, the reset routine is the same, as we describe next.

3. Press the Volume UP and Play-Pause Buttons Together

See the next picture to find the Pause Play and UP Volume buttons on this JBL Xtreme 2.

Picture of the -Volume UP- and -Play Pause- buttons.
The -Volume UP- and -Play Pause- buttons.

The JBL Xtreme 2 then enters the hard reset process, as shown in the next picture.

Note that both the Power and Connect buttons light up for a couple seconds as the hard reset advances. The Power button glows a pale blue or white, and the Connect button glows gray-white for a second or two.  We circled these buttons in green, as shown next.

Picture of the -Power- and -Connect- buttons glowing during reset.
The -Power- and -Connect- buttons glowing during reset.

Then after a short pause, the JBL Xtreme 2 turns off. All the lights go off, and it makes the power-down guitar sound.





4. Next, Check that Hard Reset of the JBL Xtreme 2 Did Happen

Next, power on the JBL Xtreme 2 again, as described in step 1 earlier.  In short, press and release the Power button, as shown next.

Now this time, after hard reset, our speaker instantly comes up in Bluetooth pairing mode, as pictured next.

Note that we did not press the Bluetooth button first, since after a hard reset, the speaker automatically enters BT pairing mode.  Note that the Power button blinks blue to show that this mode is in effect. When the Power button blinks blue or shows as solid white, the speaker is not currently paired. We expect it not to pair to anything after a hard reset.

Picture of the -Power- button blinking blue, meaning that the speaker is ON and in pairing mode.
The -Power- button flashing blue, meaning that the speaker is ON and in pairing mode.

5. Done with How to Hard Reset JBL Xtreme 2 !

The hard reset of the JBL Xtreme 2 speaker is finished at last. You may now pack it up for sale, or pair it again with your favorite Bluetooth devices.

Note again that the JBL Xtreme 2 will no longer automatically pair with any previously paired in-range Bluetooth device in Bluetooth pairing mode. So, to restore auto BT pairing for a particular device, you’ll need to forget the previously paired speaker listed in the Bluetooth device settings section of that source device.  Then, once that’s done, manually pair the speaker with that device again if so desired. Then after that, any time that both speaker and that device have Bluetooth turned on, pairing with automatically happen once again.

Related Posts to How to Hard Reset JBL Xtreme 2

    1. How to Hard Reset JBL Charge 4
    2. JBL Flip 5 How to Hard Reset
    3. How to Hard Reset Echo Dot
    4. How to Hard Reset JBL Flip 4

Other Posts About the JBL Xtreme 2 

    1. How to Connect to an iPhone
    2. Battery Life Discussed
    3. How to Restart JBL Xtreme
    4. How to Pair

References for How to Hard Reset JBL Xtreme 2

    1. JBL Xtreme 2 Official Product Page at JBL.com

Revision History

    • 2020-08-10: First published.