Front view of the Sony SRS XB12 Extra Bass Bluetooth speaker.

How to Hard Reset Sony XB12

We explain how to hard reset the Sony XB12 portable wireless speaker to set it back to its default settings. Hard resetting restores the XB12 to factory default state. Plus, it wipes away any earlier connected Bluetooth devices from its memory. Clearing these stops this unit from pairing to any nearby BT devices. Also, you might hard reset to get this unit ready for sale or re-gifting, or to stop it from syncing with devices you no longer wish it to sync with.

How to Hard Reset Sony XB12, Step by Step

1. Power UP the XB12

Press the Power button for a half-second or so and then let it go.

E.g. Find the Power button as we show in the next picture.

Picture of the Sony XB12 powered OFF, showing the -Power- button.
The Sony XB12 powered OFF, showing the -Power- button.

Then, the status light comes on, as shown next.

Picture of the XB12, powered ON, showing the Status lamp lit.
The XB12, powered ON, showing the Status lamp lit.

The speaker may make a ping-pang tone sound as it boots, should it pair to a nearby device. Or it may make no noise at all if it joins with no devices.  Yet whether paired or not, this hard reset routine works the same, as follows.





2. Press and Hold the Volume DOWN and Power Buttons At the Same Time

Find both buttons near the bottom of the speaker, as called out in the next picture.

Picture of the XB12 powered ON, showing the -Power- and -Volume Down- buttons highlighted.
The XB23 powered ON, showing the -Power- and -Volume Down- buttons highlighted.

The XB12 then enters hard reset mode.

After a small pause, the speaker powers OFF, and the power lamp goes dark, as shown next. Note that on the SRS XB12, there is no power-OFF sound.

Picture of the Sony XB12 powered OFF, showing the dark Status lamp.
The Sony XB12 powered OFF, showing the dark Status lamp.

3. Check that Hard Reset of the Sony XB12 Did Indeed Occur

Next, power on the unit again, as we detail in step 1.

Note that after a hard reset, the XB12 comes up in pairing / discovery mode. The Power lamp blinks blue rapidly to alert you to this.  This is a prompt that you may then find this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with How to Hard Reset Sony XB12 !

Hard reset is now done. So you may now gift or sell this speaker, or link it again with your favorite streaming devices.

After a hard reset, the XB12 no longer auto syncs with any prior paired Bluetooth device. Thus, to set up automatic connecting again, you manually pair it with a device. Then, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing automatically happens once more.

Related Posts to How to Hard Reset Sony XB12

    1. How to Hard Reset Sony XB01
    2. How to Hard Reset Sony XB10
    3. How to Hard Reset Sony X11
    4. How to Hard Reset Sony SRS XG500
    5. How to Hard Reset Sony X3

Other Sony XB12 Posts

    1. Sony XB12 Not Charging
    2. Sony XB12 How to Pair
    3. Sony XB12 Specs Watts
    4. How to Put Sony XB12 in Pairing Mode
    5. Sony XB12 Power Button Not Working

References

    1. Official Sony XB12 Support Page
    2. Where to Buy the Sony XB12

Revision History

    • 2023-03-15: First published.