Picture of a Wonderboom 1 alongside a Google Home Mini.

How to Reset Ultimate Ears Wonderbooms

Here, we explain how to reset Ultimate Ears Wonderbooms. This restores the factory default settings to these speakers, and can often fix some pairing errors.  Reset works as follows.

Resetting Ultimate Ears Wonderboom wipes any memorized Bluetooth devices from memory. Clearing this data prevents the UE from pairing to any nearby Bluetooth devices after the reset. Further, you might reset the Ultimate Ears Wonderboom to re gift it.  Or, you just wish  to stop its auto pairing with devices you no longer play through lt.

How to Reset Ultimate Ears Wonderbooms: Step by Step

1. Turn ON the Unit

Press and release the  Power  button.  The status lamp in that button lights and you hear a power-up sound. We’ve circled the  Power  button in the next picture.

Picture of the Ultimate Ears Wonderboom top view. Showing the dark -Power- button.
The Ultimate Ears Wonderboom top view. Showing the dark -Power- button.

Then, the status light comes on solid or it blinks, as shown next.

Picture of the white glowing -Power- button.
The white glowing -Power- button.

2. Wait for the Power Up Sound

The Ultimate Ears Wonderboom makes a unique sounding turn-on noise. The UE is then ready for reset when this sound finishes.  It may or may not pair with a device.  That depends on whether you have any in-range Bluetooth devices that know about this Ultimate Ears and that it have previously paired with as well.  Whether paired or not, reset works the same way, as follows.

3. Be Sure the Ultimate Ears Wonderboom is Not Paired

Ultimate Ears speakers do not reply to reset requests while connected with a source Bluetooth device. So, unpair the Wonderboom before resetting.

4. Press the  Power  and the   Volume DOWN  Button Together for Up to Eight Seconds

Find the  Power  and Volume DOWN   buttons.  The   Power button is on the top, near the front.  Volume DOWN   is the long vertical line on the front, near the bottom.  See these both pointed out by the green arrows in the next picture.

Picture of the -Power- and -Volume DOWN- buttons.
The -Power- and -Volume DOWN- buttons.

Ultimate Ears then enters reset.  Then, in a few seconds, the unit powers off when reset wraps up. The falling electronic kar-plunk sound goes off. Then the status light in the  Power  button goes dark, as shown above.

5. Check that your Ultimate Ears Wonderboom Did Indeed Reset

Next, power on the Wonderboom again, as detailed in step 1 above.

After a reset, Ultimate Ears comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.

6. Done with How to Reset Ultimate Ears Wonderbooms !

Reset is done now. So go ahead and let someone else use the speaker. Or pair it once more with your favorite Bluetooth devices.

After a reset, the Wonderboom no longer auto connects with any prior paired Bluetooth devices. Thus, to set up automatic BT pairing, you pair by hand the Ultimate Ears with your desired device(s). Then any time that both the Ultimate Ears and device have Bluetooth turned on, pairing again occurs without you having to do anything.

Don’t forget to delete any now-stale connections to the Wonderboom from your source Bluetooth devices that you set up prior to resetting.  These will no longer work.  So you’ll want to “forget” them in your source device’s settings pages.

Other Posts About the Ultimate Ears Wonderbooms

  1. Ultimate Ears Wonderboom Pairing Help
  2. How to Charge Ultimate Ears Wonderboom
  3. Ultimate Ears Wonderboom Buttons Guide
  4. How to Connect to Ultimate Ears Wonderboom
  5. Ultimate Ears Wonderboom Charging Instructions

References for How to Reset Ultimate Ears Wonderbooms

  1. Ultimate Ears Wonderboom Official Support Page
  2. Where to Buy the Ultimate Ears Wonderboom