Picture of the left front of the Sony SRS X2 speaker.

How to Make Sony X 2 Discoverable

To pair your X 2 Sony Bluetooth speaker with a BT source device for the first time, or to refresh stale connection data in that device, you need to understand how to start up discovery mode on this unit first.?á Now in discovery mode, the speaker digitally announces its name and linkage data over Bluetooth, so that nearby devices can find and join with it.?á Then once paired, the source device can stream audio to the speaker, which of course, is something that so many like to do with Bluetooth speakers.?á So in this post, we show you how to make the Sony X 2 discoverable, to let you link it with phones, tablets, computers, and smart speakers.

How to Make Sony X 2 Discoverable, Step by Step

1. Turn On the X 2

Firstly, turn on the speaker by rapidly pressing and releasing its?á Power?á button.

E.g. Find this button on the top of the speaker, last button on the right in the back row of buttons.?á See it pointed out by the arrow, in the next picture.

Picture of the Power button on the Sony X 2.
The Power button on the Sony X 2.

The speaker then starts up.

Picture of the green glowing Power lamp.
The green glowing Power light.

Now if the X 2 has never connected with a device since its last reset, then it automatically makes itself discoverable when you turn it on.?á But if you have paired it with a phone or other mobile device since then, then you must manually put it in discovery mode now, when you sync it with your source BT device.





2. Press the Pairing Button

Secondly, briefly press this button. E.g. See the location of this button in the last picture.?á Find it in the front row of buttons on top, second button from the left. You needn’t hold it in for more than a half-second for discovery mode to begin.

Picture of The Pairing button on the Sony X 2.
The Pairing button on the Sony X 2.

The speaker then plays two short beep tones, and the Pairing lamp starts fast flashing. So at this point, the unit is now discoverable by other BT devices.

Picture of the Pairing lamp blinking white.
The Pairing light flashing white.

Note also that putting the speaker in discovery mode does not clear its prior stored connections.?á Discovery mode just allows you to connect to and add new devices to its memory, but does not delete any.

Now if the speaker is misbehaving and will not go into discovery mode, you can try resetting it and see if that solves the problem.

3. Done with How to Make Sony X 2 Discoverable

Screenshot of the Sony X 2 showing as discovered on iPadOS.
The Sony X 2 showing as discovered on iPadOS.

Finally, while the Bluetooth Pairing lamp is fast flashing ON and OFF, you should see the X 2 on any in-range cell phone, computer, tablet, or smart speaker assistant, that is within several feet of it, as we see in the last picture.?á The speaker appears as “SONY:SRS-X2” there.

Related Posts to How to Make Sony X 2 Discoverable

    1. How to Make JBL Pulse 3 Discoverable
    2. How to Make Sony XP 500 Discoverable
    3. How to Make JBL Clip 4 Discoverable
    4. How to Make Sony SRS XB22 Discoverable
    5. How to Make JBL Charge 3 Discoverable

Other Sony X 2 Posts

    1. Sony X 2 Sound Button Explained
    2. Sony X 2 Buttons Guide
    3. Sony X 2 Watts Output
    4. Sony X 2 Firmware Update Instructions
    5. Sony X 2 Factory Reset Instructions

References

    1. Official Sony X 2 Support Page
    2. Where to Buy the Sony X 2

Revision History

    • 2023-04-17: First published.