To pair your XB 10 Sony speaker with a Bluetooth source device for the first time, or to refresh old connection info in that device, you have to know how to start up discovery mode on the speaker. Specifically, in this mode, the speaker broadcasts its name and currently valid connection information over the Bluetooth airwaves. So in this post, we show you how to make the Sony XB 10 discoverable, to let you to link it with phones, tablets, computers, and smart speakers.
Turn on the speaker first by rapidly pressing its Power button.
E.g. See this button, pointed out by the green arrow, in the next picture.
The speaker then comes on.
Secondly, this allows you to discover your XB 10 on your source Bluetooth device. So, make the speaker discoverable by pressing and holding the the Power button, as pointed out in the first picture above.
Additionally, when you press this Pairing button, the speaker plays a ding-dong beep sound. Also, the status lamp begins rapidly flashing white.
Lastly, while the Status lamp is blinking, you should be able to see the XB 10 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.
Then you can link to it from the source device it is appearing on.
Here, we show how to factory reset the Chromecast receiver. First, a factory reset restores…
Here, we offer our Chromecast Audio Factory Reset procedure. Doing this restores this unit to…
The Google Chromecast Audio receiver now offers basic equalizer controls (bass and treble). Moreover, you…
The Google Chromecast Audio offers basic equalizer controls (bass and treble). Moreover, you set these…
Gives the Connect Google Chromecast Audio Directions. These explain how to plug in to its…
Here, we explain How to Put Sony SRS XB22 in Pairing Mode. You need to…