The original Google Home smart speaker, pictured above, now functions as a Bluetooth speaker due to firmware and Google Home app updates in 2017. In this post, we show how to pair your tablet or phone to Google Home via Bluetooth. Then, you can send audio to Google Home for room-filling, awesome sounding playback.
Intro to Pair Google Home as Bluetooth Speaker
We’d like to be able to connect (pair) the Google Home smart speaker to an iPad Air tablet, such that the speaker becomes a Bluetooth speaker, allowing us to play any audio that the iPad is playing, through the Google Home speaker. You might do this if you’re watching a Netflix movie or playing your Amazon music library on your iPhone, but wish to have louder, and over all better sound for it than what you get via the speakers built into your phone. You wish to enjoy the full sound of your Google speaker for all this content.
This futuristic procedure assumes that would be connecting the same iPad to the Google Home speaker as what you’re running the Google Home app on.
How to Pair Google Home as Bluetooth Speaker with an iPad
1. Connect All Devices to the Internet
Make sure that both your tablet and your Google Home speaker are online and connected to the Internet.
2. Turn Bluetooth ON
Enable Bluetooth on the source device that you’re pairing with the Google Home speaker. In our case, we’re pairing from an iPad Air.
Then, assure that you see the “Now discoverable as” message, as shown next.
3. Next, on the Source Device, Run the Google Home App
On our iPad, we find this app on the third home page, as shown next.
The Google Home app Home screen then displays, as shown next.
4. Then, Tap the Hamburger Item
up at the top left corner of the Google Home app home screen. This brings up the main menu window, as shown next.
5. Tap the Devices Menu Item
This brings up the list of Google Home devices that the app knows about, as shown next.
6. Tap the Hamburger Menu Link for the Home Speaker you’re Pairing
We point at the hamburger item with the purple arrow in the last picture.
Then, the device control menu opens, as shown in the next picture.
7. Tap the Settings Item
Find Settings in the device control menu as shown in the last picture. We drew in the purple arrow, pointing to it.
You then see the Device Settings screen for the specific Google Home speaker device displayed on the last screen, whose specific setting options are shown on the screen shown next. In our case, that device is named Living Room Home.
Note that we’ve scrolled down to the Device Settings section on this screen to find the Paired Bluetooth Devices option, as circled in the next picture.
8. Tap the Paired Bluetooth Devices Item
We circled the Paired Bluetooth Devices menu option in the last picture.
The Paired Bluetooth Devices screen then appears as shown next. Here, we could choose a Bluetooth device from a list of devices that we’ve previously paired with, had we ever paired with any before. Since we have not, the screen is almost entirely blank.
9. Tap the Enable Pairing Mode Link
This puts the Google Home device we’re working with into Bluetooth discovery mode. That is, it will now show up when other in-range devices scan for Bluetooth Devices.
Confirmation of this is shown by a black bar momentarily appearing at the bottom of the Paired Bluetooth Devices screen, as shown next.
10. Go to the Bluetooth Settings Screen in the Settings App on your Phone or Tablet
On our iPad Air, we hit the home button, tapped the Settings app, and then tapped Bluetooth on the left side of the screen, to reveal the following screen.
11. To Pair Google Home as Bluetooth Speaker, Tap the Device to Pair to It
Next, you would tap the device in this list that you wish to pair with your Google speaker.
In our case here, that would be the Living Room device, as circled above.
Then, if all goes well, your speaker would play a short burst of musical chord, and pairing then occurs. Your paired device then moves up from the Other Devices list to My Devices if you’re using pairing with an iOS device, as shown next for our case; the purple circled Living Room device.
Finally, the Google Home App adds the source device to its known Bluetooth devices list, as shown next.
12. Pair Google Home as Bluetooth Speaker is Done!
At this point, all your tablet’s generated sounds play on your Google Home speaker. Pairing is complete.
How to Unpair Google Hoe
You would unpair your speaker from a source Bluetooth device by saying, “Okay Google, disconnect” or “Hey Google, disconnect.” Google Home lets you unpair it from the source by either issuing these voice commands to it, or by ending the connection from your tablet or phone.
Related Posts to How to Pair Google Home as Bluetooth Speaker
- Changing Wi-Fi Network on Google Home Smart Speaker
- Connecting Google Home Speaker to Honeywell Smart Thermostats
- Google Home Smart Speaker Review
- Resetting Google Home Smart Speaker to Factory Default State
- Unboxing Google Home Voice Activated Speaker
- Unlink Spotify from Google Home Speaker
- Use Echo Dot as Bluetooth Speaker, How To
- Google Home Connect to Bluetooth Speaker Instructions
- Use Google Home Mini as Bluetooth Speaker, How To
- Connect Google Home Mini to Bluetooth Speakers, How To
- Reset Wonderboom Bluetooth Speaker Instructions
- JBL Flip 3 Review of this Portable Bluetooth Speaker
- How to Charge JBL Go Bluetooth Speaker
- JBL Flip 2 Review and Features of this Bluetooth Speaker
- How to Charge JBL Flip 4 Wireless Bluetooth Speakers
- Reset Charge 3 Bluetooth Speaker, How To
- Connect Bluetooth Speaker to Google Home, How To
- How to Adjust Volume on JBL Flip 4 Bluetooth Speaker
- Pairing Echo Dot with Bluetooth Speaker, Echo Dot 2, How To
- How to Adjust Volume on JBL Clip 3 Bluetooth Speaker
References for How to Pair Google Home as Bluetooth Speaker
- 2019-08-25: Added key word targeting for ‘Pair Google Home as Bluetooth’, removed ad code, and added more tags and links.
- 2017-10-29: Originally published.