Picture of an iPhone in front of the Sony SRS XE300 Bluetooth speaker.

How to Pair Sony Speaker to iPhone 12

This post explains how to pair a common Sony speaker like the SRS Extra Bass wireless series, with an iPhone 12 or other smart device.

How to Pair Sony Speaker to iPhone 12, Step by Step

With your speaker powered off (status lamp is dark), run through this routine to pair it to your iPhone mobile device.

1. Bring up the Home Screen on your iPhone 12

First off, press the Home button to get to the iPhone’s Home screen. Now our test phone here is the 12. But the pairing routine is the same for most other models of iPhone.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

The -Settings- app icon on the iPhone -Home- screen.
iPhone -Home- screen showing the -Settings- app.

3. Bring Up the Settings App

Thirdly, tap the Settings app icon.

The iPhone 12 then displays the first page of its settings, as shown in the next step.





4. Go to Bluetooth Settings to Continue with How to Pair Sony Speaker to iPhone 12

The Bluetooth settings screen displays as follows. Note that our Bluetooth is enabled here. But since our BT speaker is currently powered OFF and so, not in discovery mode, it does not appear in the BT devices list. Also, we don’t see it since we’ve never paired this Sony speaker with this test iPhone before, it should not appear here.

E.g. See this as shown in this list of previously paired Bluetooth devices, shown next.

Screenshot of the -Bluetooth Settings- page on an iPhone.
The iPhone -Bluetooth Settings- page.

5. Turn On your Sony Speaker

Press and release the Power button to power up this speaker.

E.g. See the Power button pointed at by the green arrow in our example speaker, in the next picture.

Picture of a common Sony speaker, showing the -Power- button.
A common Sony speaker, showing the -Power- button.

The speaker then powers up.

But since an iPhone 12 does not know about this speaker if never paired to it before, the Sony will not link with it automatically. The pairing status light pointed at by the arrow in the next picture may either blink fast, slow, or remain dark therefore, to denotes this not-paired state.

Showing that speaker power is ON, and the Status lamp glowing.
Showing that speaker power is ON, and the Status lamp glowing.

6. Put your Sony Speaker into Discovery Mode

Now, to see your BT speaker on your iPhone, place it into Bluetooth pairing mode. On many Sony speaker models, you press and hold the Power button until you hear a couple beeps.  Also, some have a status lamp that begins blinking white or blue.

7. Find your Speaker on your Mobile Device to Continue with Pair Sony Speaker to iPhone 12

See the screen shot next. We found our speaker, as pointed at by the blue arrow.

Screenshot of a typical Sony speaker showing as discovered on an iPhone.
A common Sony speaker showing as discovered on an iPhone.

8. Pair your iPhone 12 with your Sony Speaker 

Next, tap the listed speaker in the Devices list.

Your iPhone then links with the speaker.

Then, the iPhone’s Bluetooth Settings screen then changes to look something like the following.  The blue arrows show the Sony speaker now paired to iPhone.

Screenshot of an iPhone showing the typical Sony speaker as paired.
An iPhone 12 showing the typical Sony speaker as paired.

9. Done with How to Pair Sony Speaker to iPhone 12 Directions !

Finally, we have now successfully linked our wireless speaker with a device like an iPhone.

Other Posts About the Sony Speaker

    1. How to Reset Sony Speaker
    2. How to Turn Off Lights on the Sony Speaker
    3. Putting a Sony Speaker in Pairing Mode

References for How to Pair Sony Speaker to iPhone 12

    1. Sony Speaker Official Product Page at Sony.com
    2. iPhone Official Product Page at APPLE.com

Revision History

    • 2023-03-01: First published.