Screenshot of the iPadOS Bluetooth page, showing the Sony SRS XB10 speaker connected.

How to Pair Sony SRS XB10

This post explains how to pair the Sony SRS XB10 Extra Bass wireless speaker with an Android or Apple mobile device via Bluetooth.

How to Pair Sony SRS XB10: Step by Step

With your XB10 powered off (status lamp is dark), run through this routine to pair it with your mobile device.

1. Bring up the Home Screen on your Source Device

Firstly, press the Home button or swipe up to get to the Home screen. The technique differs depending on which device you have.

2. Find the Settings App

We found ours on the second page of the Home screen on an iPad Air.

Screenshot of an iOS Home page, showing the -Settings- app.
An iOS Home screen showing the -Settings- app.

3. Bring up the Settings App

Thirdly, tap the Settings app icon.

The device then displays the first page of its settings.





4. Go to Bluetooth Settings to Continue with How to Pair Sony SRS XB10

Note that our Bluetooth is running here. But since our  SRS XB10 is currently OFF, then it is therefore not in discovery mode. Thus it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this XB10 with this tablet before.

Screenshot of the Previously Paired Bluetooth Devices list, empty.
The Previously Paired Bluetooth Devices list, empty.

5. Turn On your Sony SRS XB10

So turn on the XB10 by quickly pressing its Power button.

Picture of the Sony SRS XB10. Showing the -Power- button.
The Sony SRS XB10. Showing the -Power- button.

The speaker then powers up.

But since an iPhone does not know about this speaker if never paired to it before, the XB10 will not link with it automatically. Thus the status light either blinks fast or slow therefore. In either case, this denotes this not-paired state.

Picture of the -Status- lamp glowing.
The -Status- lamp glowing.

6. Put your XB10 into Pairing Mode

Then  to see this speaker on your tablet / phone, place it into Bluetooth discovery mode. To do that, press and hold in the Power-Pairing button. Then release it when you hear two high beeps, and the status lamp starts fast-blinking white.

7. Find your Speaker on your Mobile Device to Continue with How to Pair Sony SRS XB10

We find our test speaker as follows.

Screenshot of an iPadOS -Bluetooth Settings- page. Showing the Sony SRS XB10 as discovered.
An iPadOS -Bluetooth Settings- screen. Showing the Sony SRS XB10 as discovered.

8. Pair with the Sony SRS XB10 

Then, tap the listed speaker in the Devices list.





Your source device then pairs with the XB10.

So the Bluetooth Settings screen then changes to look something like the following.  The green arrows show the Sony SRS XB10 now paired.

Screenshot of the Sony SRS XB10 now Connected.
The Sony SRS XB10 now Connected.

9. Done with How to Pair Sony SRS XB10 !

At last, we have now successfully linked our XB10 wireless speaker with typical mobile Bluetooth device.

Other Posts About the Sony SRS XB10

    1. How to Check Sony SRS XB10 Battery Life
    2. Sony SRS XB10 Charging Instructions
    3. How to Factory Reset Sony SRS XB10 Speaker
    4. Sony SRS XB10 Buttons Explained
    5. How to Turn Off the Sony SRS XB10 Bluetooth Speaker

References for How to Pair Sony SRS XB10

    1. Sony SRS XB10 Official Product Page
    2. Where to Buy the Sony SRS XB10