The glowing ST PAIR lamp on the Sony SRS XB13 speaker.
The ST Pair function on the Sony speaker models allows you to pair two Sony speakers together to form a stereo (L + R) set. So in this piece, we show you how to use this feature to enjoy more life like sounding music from this speaker. The only extra cost is that you must have two of the same speaker, to get the stereo sound with wide separation.
We show this here using the Sony SRS XB13 model. But a similar routine works on the other models that support this.
Note that the speaker with the glowing Bluetooth lamp is the primary speaker in the stereo set. So that means that it is the one you would work to answer a call by pressing the Play-Pause-Phone button.
Also, the speakers will remain connected together even after you turn them off. This just means that the next time you turn one of them on, it will look for the other one in the ST PAIR set to connect with. And if either speaker does not find the other after one (1) minute, then it reverts to single speaker operation.
To end this speaker joining, while both speakers are powered up and connected to each other, press and hold the Pairing button on one of them for approximately three (3) seconds.
Release the button when you hear a beep. The stereo pairing has now been dissolved.
This post illustrates how to connect JBL Xtreme 1 with iPhone, a reasonably simple process…
We've enjoyed hot instant coffee and tea for more than a score now. So these…
Why would you need to perform Honeywell RTH8580WF wireless setup for this common thermostat ? …
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …