Alexa app on iOS, showing its -Bluetooth Settings- page, with the -Pair a New Device- button highlighted.
This post shows how to pair Ultimate Ears Wonderboom with Alexa speakers. These directions include the all Bluetooth (BT) compatible Echo Dot smart speakers. And, since this pairing happens between this speaker and the Echo Dots, you need not turn BT on in the mobile device you’re using to build this pairing.
With your Wonderboom powered off (power button is dark), run through this routine to pair it to your Amazon Echo. We’re using an iPad Air tablet to set up this BT connection.
We located the Alexa app on our iOS iPad Air as seen in the next picture. In our scenario, the app is on the third home screen page.
The app then displays its Home screen as shown in the next screenshot.
Find the hamburger item in the top left corner of the screen, pointed at by the Logitech arrow in the last screenshot.
This brings up the Alexa app’s main menu, as shown in the next screenshot.
We point at the Settings item with the green arrow in the last screenshot.
This brings up the Settings screen.
This brings up the All Devices screen, where all of your connected Amazon Alexa enabled devices appear in a list, as shown next.
For this demo, we chose the Thomas’s Echo Dot 3rd Gen Alexa speaker, although pairing works similarly with all the other Bluetooth enabled Alexa speaker models.
Anyway, touching the speaker listed that you wish to pair then takes you to the device-specific settings screen for that particular Echo, as seen in the next screenshot.
Find the Bluetooth Devices option pointed at by the green arrow in the last screenshot.
This brings up the Bluetooth Devices screen, as shown next.
At this point, your Alexa app is ready to begin a BT scan by your chosen Echo Amazon speaker. We selected our Alexa Dot 3 in the last step. So, that Dot will be the one that looks for BT devices when we press the Pair a New Device button.
BUT WAIT A MINUTE! Don’t press that button just yet. We must turn on the Wonderboom Logitech speaker first, and then make sure the Wonderboom is in Bluetooth pairing mode. But if your Logitech is already powered ON and ready to pair, then skip the next step, and move on to step 9 below.
Put down your mobile device for a second, and turn on the Wonderboom by quickly pressing its Power button. See this button circled in the next picture.
The Wonderboom then powers up.
But since our Echo Dot 3 has never paired with this Wonderboom prior, it has no connection information for it in its previously paired Bluetooth devices list. Thus the Logitech speaker will not yet pair with this Dot automatically.
Now, to allow an Alexa Echo smart speaker to find the Wonderboom UE, place your Logitech into BT pairing mode. Specifically, press and hold in the the Bluetooth button on the speaker for around two seconds. Find this button shown circled in green, next picture.
When you depress the Bluetooth Discovery Mode button, after two seconds, the Wonderboom makes a rising sound twice. Release the button at this time. Also, the Bluetooth button starts quickly flashing white. See this in the last picture above, which depicts the Bluetooth button flashing white, indicating that discovery mode is in effect.
The screen with the blue Pair a New Device button should still be there, as in the next screenshot.
This starts your Echo speaker scanning for nearby Bluetooth devices that are in BT discovery mode themselves. Since your Ultimate Ears Wonderboom is now in BT discovery mode, the Dot should find it if in range. Our Ultimate Ears Wonderboom was indeed close enough for our Gen 3 Dot to pick up.
Thus, after a short time, you should get something like the screen we got. Shown next.
In our demo, the Amazon Alexa app, through our 3rd generation Dot, found our Ultimate Ears speaker, named WONDERBOOM.
See the screenshot above. Our scan found two Bluetooth devices nearby. It found the Wonderboom Logitech speaker as well as our Roku media player.
So, we easily found our speaker in this list, as pointed out by the arrow in the last picture.
Pair with the Wonderboom by touching that speaker entry on the Bluetooth Setup screen, shown in the last screenshot earlier.
The Alexa speaker then pairs with the Wonderboom Logitech speaker.
Shortly afterwards, the Alexa App’s Bluetooth Settings screen then appears something like the following.
Also, the speaker plays the Speaker Paired ker-plunk sound. Note that the Bluetooth symbol to the left of the listed speaker item appears in the last screenshot, as pointed at by the arrow. This shows you which memorized speaker in the Previously Paired Bluetooth Devices list is currently paired to your Alexa speaker.
The Bluetooth button on the Ultimate Ears Wonderboom now glows solid white, meaning that successful pairing has happened, as shown next.
After several seconds, this BT light goes OFF.
We have now successfully paired our Ultimate Ears Wonderboom with our Amazon Dot 3 Alexa Echo speaker. Thus, we may now ask Alexa to play music on this Dot, and she’ll stream it to the BT speaker. Thus, that music will play on the very “big sounding” Ultimate Ears Wonderboom, instead of the Alexa. This Bluetooth speaker offers a louder, fuller sound than your run-of-the-mill Echo speakers. Plus, it’s in stereo too! So pairing these devices has definite sound advantages.
Here, we show how to factory reset Alexa Echo Studio, to put it back to…
This post explains How to Connect Alexa Studio to WiFi. Plus, this routine works for…
This post explains How to Connect Alexa Studio to Internet. Plus, this routine works for…
This post explains How to Connect Alexa Echo Studio to Internet. Plus, this routine works…
This post gives explains How to Connect Alexa Echo Studio to WiFi. Plus, this routine…
Here we give the reconnect Alexa to WiFi procedure. Well, to do that you must…
