Front picture of the Wonderboom 2 Bluetooth Speaker Beside an Alexa Echo Dot 3 Smart Speaker.

How to Pair Wonderboom 2 with Alexa

This post demos how to pair the Wonderboom 2 Bluetooth speaker to Alexa Amazon devices.  We use an Echo Input Alexa receiver in this demo, and since this Bluetooth connecting happens between the speaker and the Alexa Input directly, you need not turn Bluetooth on in the mobile device you’re using to set up this link.

How to Pair Wonderboom 2 Bluetooth Speaeker with Alexa

Start with your Wonderboom 2 speaker powered OFF.  Then run through this routine to connect it to the Alexa Echo device. We’re using an iPad Air tablet to set up this linkage.

1. Find the Alexa app on your Mobile Device

We found the app on an iPadOS iPad Air as shown in the next screenshot. In our case, the Alexa app is on the third home screen page. It’s pointed at by the blue arrow.

Screenshot of the iOS home screen, showing the Amazon Alexa app Icon highlighted.
iOS home screen, showing the Amazon Alexa app Icon highlighted.

2. Run the Alexa App

The app displays its Home screen as shown in the next screenshot.

Screenshot of the Alexa app on iPadOS Home page, with the -More- Item highlighted.
The Alexa app on iPadOS Home screen, with the -More- Item highlighted.

3. Tap the More (Hamburger) Control 

Find the hamburger item in the lower right corner of the screen. This is pointed at by the green arrow in the last screenshot. You may find this control near the top LEFT corner of the page if you’re running an older version of the Alexa app.

This brings up the Alexa app’s main menu, as shown in the next screenshot.

Screenshot of the app's main menu, with the -Settings- item highlighted.
The app’s main menu, with the -Settings- item highlighted.

4. Tap the Settings Option on the Main Menu to Continue with How to Pair Wonderboom 2 with Alexa

The Settings option is pointed at by the green arrow in the last screenshot.





This brings up the Settings screen, as shown in the next screenshot.

From here, choose which Alexa device you wish to pair to your Wonderboom 2.  The green arrow in the next picture points at our choice,  the Thomas’s Echo Input device.

Screenshot of the -All Devices- page, with an Echo Input highlighted.
The -All Devices- page, with an Echo Input highlighted.

5. Tap the Alexa Device you Want to Pair with this Speaker

This takes you to the device-specific settings screen for the Echo Input you picked.

Screenshot of the Alexa app on iPadOS, displaying the -Device Settings- page for the Echo Input, with the -Bluetooth Devices- option highlighted.
The Alexa app on iPadOS, displaying the -Device Settings- page for the Echo Input, with the -Bluetooth Devices- option highlighted.

6. Tap the Bluetooth Devices Item

Find the Bluetooth Devices menu item pointed at by the green arrow in the last screenshot.

This brings up the Bluetooth Devices screen, as shown next.

At this point, you’re ready to start a Bluetooth scan by the Alexa device you just chose for this pairing. In this demo, our Echo Input will be the one that scans for Bluetooth devices.

But don’t press the Pair a New Device button just yet. We must first power up the Wonderboom 2, and put it into pairing mode.

Screenshot of the -Select Previously Paired Device- page, with the -Pair a New Device- button bar highlighted.
The -Select Previously Paired Device- page, with the -Pair a New Device- button bar highlighted.

7. Turn On your Wireless Speaker to Continue with How to Pair Wonderboom 2 with Alexa

Put down your mobile device for a moment, and turn on your BT speaker.  On the Wonderboom 2, we turn the speaker on by quickly pressing its Power button. See this button pointed at by the green arrow, in the next picture. Your Power button may look similar.

Top view of the Wonderboom 2 Bluetooth speaker. showing the dark Power button, highlighted.
Top view of the Wonderboom 2 Bluetooth speaker. showing the dark Power button, highlighted.

The speaker then powers up.

But since our Alexa Input device does not know about this speaker yet, this  speaker will not connect with it automatically. Thus, the Bluetooth light that shows as dark after you power up this speaker.





8. Put your Wonderboom 2 into Pairing Mode

Now, to allow Alexa Input to find your speaker, place the Wonderboom 2 in Bluetooth discovery mode by pressing, holding for one to three seconds, and releasing the Bluetooth button. Find this button circled in the next picture.

Top view of the Wonderboom 2 speaker with its Bluetooth pairing button circled.
Top view of the Wonderboom 2 speaker with its Bluetooth pairing button circled.

When you press the Bluetooth Pairing Mode button, the Wonderboom 2 makes a cool noise noise to let you know that it’s ready to pair. Also, the Pairing button  flashes to signify that the speaker is in pairing-discovery mode.

9. Now, Go Back to your Mobile Device 

The screen with the blue Pair a New Device button should still be showing, as in the next screenshot.

Screenshot of the Alexa App on iPadOS displaying its -Select Previously Paired Device- page, with the -Pair a New Device- button bar highlighted.
Alexa App on iPadOS displaying its -Select Previously Paired Device- page, with the -Pair a New Device- button bar highlighted.

10. Tap the Blue Pair a New Device Button to Continue with How to Pair Wonderboom 2 with Alexa

This starts our Alexa device scanning for any nearby BT devices that are themselves in pairing mode. Since your speaker is now in this discovery mode, the Alexa device should find it.

After a short pause, you should see something like the screen we got. Shown next.

Screenshot of the app displaying its -Pair Bluetooth Device with your Echo Input- page, with a Wonderboom 2 Bluetooth speaker on the list highlighted.
The app displaying its -Pair Bluetooth Device with your Echo Input- page, with a Wonderboom 2 Bluetooth speaker on the list highlighted.

 

In our demo, the Alexa app found our speaker, named  WONDERBOOM 2.

11. Find your Wonderboom 2 on the Discovered Devices List

Then, we located our speaker in the list, as pointed at by the green arrow in the last picture above.





12. Finally, Pair your Wonderboom 2 with your Alexa Device

Connect to the WB-2 by tapping the listed speaker in the Bluetooth Setup screen, shown in the last screenshot above.

The Alexa device then connects with the speaker, as shown next.

Screenshot of the app displaying its -Select a previously paired device- page, showing a Wonderboom 2 speaker as paired.
The app displaying its -Select a previously paired device- page, showing a Wonderboom 2 speaker as paired.

13. Tap the Cancel Link

Next, touch the blue CANCEL link just under the blue bar, as pointed out by the green arrow in the last picture.

The app then takes you back to the Device Settings page for the Echo Input, as shown next.

Screenshot of the -Device Settings- page for an Echo Input, showing 1 paired and connected device highlighted.
The -Device Settings- page for an Echo Input, showing 1 paired and connected device highlighted.

Also, the Wonderboom 2 then makes a Speaker Paired sound (the two ascending blunk tones).

13. Done with How to Pair Wonderboom 2 with Alexa !

We have now successfully paired our WB-2 speaker with an Alexa smart device. So we can now ask Alexa to play music or any other streaming audio through the Wonderboom 2.

Other Posts About Alexa

  1. Alexa WiFi Setup Instructions for Amazon Echo Speakers
  2. How to Connect Honeywell Thermostat to Alexa
  3. How to Get Alexa to Play Spotify Playlists
  4. Resetting Alexa Echo Dot 3rd Generation
  5. How to Reconnect Alexa to WiFi Internet

Related Posts to How to Pair Wonderboom 2 with Alexa

  1. How to Pair Alexa with Bluetooth Speaker, Add
  2. Pairing JBL Xtreme with Alexa Echo
  3. How to Pair Logitech Wonderboom with Alexa Echo
  4. Pairing JBL Charge 4 with Alexa Echo Speakers
  5. How to Pair JBL Flip 5 with Alexa

References for How to Pair Wonderboom 2 to Alexa

  1. Amazon Alexa Echo Described at Wikipedia.org
  2. Where to Buy Wonderboom 2

Revision History

  • 2020-09-16: First published.