Left front view of the JBL Xtreme 2 portable Bluetooth speaker.

How to Put JBL Xtreme 2 in Pairing Mode

To pair the Xtreme 2 JBL speaker with a wireless source device for the first time, or to refurbish the connection information stored on that device, you must know how to begin pairing mode on the speaker.  Moreover, in this mode, the JBL Xtreme 2 advertises its name and current linkage details on the BT airwaves.  So in this post, we show you how to put the JBL Xtreme 2 in pairing mode. With this information, you can then join it to phones, tablets, computers, and smart speakers.

How to Put JBL Xtreme 2 in Pairing Mode

1. Turn On the Xtreme 2

Firstly, turn on the speaker by pressing and releasing its  Power  button once.

See this button, pointed at by the bright green arrow, in the next picture.

Top view of the JBL Xtreme 2 Bluetooth speaker, showing the -Power- button highlighted and dark (OFF).
Top view of the JBL Xtreme 2 Bluetooth speaker, showing the -Power- button highlighted and dark (OFF).

The speaker then comes on, as pictured next.

Top view of the Bluetooth speaker, powered ON, but not paired, with its -Power- button glowing white and highlighted.
Top view of the Bluetooth speaker, powered ON, but not paired, with its -Power- button glowing white and highlighted.

2. Press the Pairing Mode Button and Release when the Power Button Starts Flashing

Secondly, to be able to locate your speaker on your source Bluetooth device, place it into pairing mode by pressing and releasing the the Pairing button, as we see in the next picture.

Top view of the speaker, with the -Bluetooth Pairing- button highlighted.
Top view of the speaker, with the -Bluetooth Pairing- button highlighted.

When you press this Pairing button, the speaker makes a plucking guitar pairing sound. Plus, the Power button lamp begins fast-flashing blue.





See this in the next picture, just to the right of the Pairing and Volume Down buttons.

Top view of the JBL Xtreme 2, showing the -Power- button highlighted and blinking blue, meaning that the speaker is in pairing mode..
Top view of the JBL Xtreme 2 showing the -Power- button highlighted and blinking blue, meaning that the speaker is ON and in pairing mode.

3. Done with How to Put JBL Xtreme 2 in Pairing Mode

Finally, while the Power button is flashing blue, you should be able to find your Xtreme 2 on any phone, computer, tablet, or smart speaker, that is within a small number of feet of it, as seen next. For example, our speaker here is named “Tom’s Xtreme 2”. But if you haven’t named yours something else, it will show up as “JBL Xtreme 2”.

Screenshot of the iPadOS Bluetooth page, showing the Tom's Xtreme 2 speaker discovered and highlighted.
The iPadOS Bluetooth page, showing the Tom’s Xtreme 2 speaker discovered and highlighted.

 

Other Posts About the JBL Xtreme 2 Bluetooth Speaker

    1. How to Restart JBL Xtreme 2 Power Bank Speaker
    2. JBL Xtreme 2 Buttons, Codes Combinations Meanings
    3. How to Rename JBL Xtreme 2, Change Speaker Name
    4. JBL Xtreme 2 Charging Indicator, Battery Indicator Details
    5. How to Hard Reset JBL Xtreme 2 Bluetooth Speaker

Related Posts to How to Put JBL Xtreme 2 In Pairing Mode

    1. Putting Wonderboom 1 Speaker into Pairing Mode
    2. How to Put Alexa in Pairing Mode
    3. How to Put Wonderboom 2 Speaker into Pairing Mode
    4. Putting JBL Go 2 in Pairing Mode
    5. How to Put JBL Charge 3 in Pairing Mode

References

    1. JBL Xtreme 2 Power Bank Speaker Official Product Page at JBL.com

Revision History

    • 2020-08-15: First published.