The iPhone Bluetooth Settings page, showing a Sony SRS X11 speaker as Discovered.
To pair your Sony X 11 speaker with a Bluetooth source device for the first time, or to refresh old connection info in that device, you have to know how to start up pairing mode on the speaker. Furthermore, in this mode, the speaker broadcasts its name and currently valid connection information over the Bluetooth airwaves, which allows you to connect to it and stream your music or other audio to it. So in this post, we show you how to put the Sony X 11 into pairing mode, to let you to link it with phones, tablets, computers, and smart speakers.
Turn on the speaker by rapidly pressing its Power-Pairing button.
E.g. See this button, that we point out with the green arrow, in the next picture.
The speaker then comes on.
Place the speaker into pairing mode by pressing and holding the Power-Pairing button, as pointed out in the first picture above.
When you press this Pairing button, the speaker plays a ding-dong beep sound. Plus, the status lamp begins rapidly flashing white.
While the Status lamp is blinking, you should be able to see the X 11 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.
Note in the last picture, that the speaker appears as “SRS-X11”. So at this point, you could connect to the X 11 if you wish.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…