To pair Ultimate Ears Wonderboom with a Bluetooth source device for the first time, or to refresh old connection info in that device, you have to know how to start up pairing mode on the speaker. When in this mode, the speaker broadcasts its name and currently valid connection information over the Bluetooth airways. Then, BT devices nearby can “hear” these broadcasts and use the information sent out to connect to them. So in this post, we show you how to put Ultimate Ears Wonderboom in pairing mode, so you can link it with phones, tablets, computers, and smart speakers.
How to Put Ultimate Ears Wonderboom In Pairing Mode
1. Turn On the Speaker
Firstly, turn on the speaker by rapidly pressing its Power button.
See this button, circled in green, in the next picture.
The speaker then comes on.
2. Press the Pairing Button for Two to Three Seconds
Secondly, to be able to discover your speaker on your source Bluetooth device, first place it into pairing mode. To do that, press and hold the the Pairing button, as circled in the next picture.
When you press this Pairing button, the speaker makes an offbeat but cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.
3. Done with How to Put Ultimate Ears Wonderboom in Pairing Mode
Thirdly, while the Pairing button is blinking, you should be able to see your speaker on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.
