Top view of the Ultimate Ears Wonderboom 2 speaker with its Bluetooth pairing button circled.

How to Put Wonderboom 2 Speaker in Pairing Mode

To pair your Wonderboom 2 speaker with a Bluetooth source device for the first time, or to update stale connection information in that device, you have to know how to start pairing mode on the speaker. Why? Because in this mode, the speaker transmits  its name and currently valid connection data over the Bluetooth airwaves, which enables other nearby Bluetooth devices to pair to it.  So in this post, we show you how to put the Wonderboom 2  speaker into pairing mode, to allow you to link it with phones, tablets, computers, and smart speakers.

How to Put Wonderboom 2 Speaker into Pairing Mode

1. Turn On the Wonderboom 2

Firstly, turn on the speaker by rapidly pressing its  Power  button.

E.g. See this button that we point at with the yellow arrow, in the next picture.

Top view of the Wonderboom 2 Bluetooth speaker. showing the dark Power button, highlighted.
Top view of the Wonderboom 2 Bluetooth speaker. showing the dark Power button, highlighted.

The speaker then comes on, as pictured next.

Top view of the speaker, powered ON, with its -Power-button lit and highlighted. How to Put Wonderboom 2 Speaker into Pairing Mode.
Top view of the speaker, powered ON, with its -Power-button lit and highlighted.

2. Press the Pairing / Discovery Mode Button for Two to Three Seconds

Secondly, to be able to discover your speaker on your source Bluetooth device, place it into pairing mode. For that, press and hold the the Pairing button, as circled in the next picture.

Top view of the speaker with its Bluetooth pairing button circled.
Top view of the speaker with its Bluetooth pairing button circled.

When you press this Pairing button, the speaker makes a cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture, circled in yellow.





3. Done with How to Put Wonderboom 2 Speaker into Bluetooth Pairing Mode

Finally, while the Pairing button is blinking, the Wonderboom 2 is now in pairing mode.  So you should  see your Wonderboom 2 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.

Screenshot of the iPadOS Bluetooth Settings page, showing the Wonderboom 2 speaker as found and highlighted. How to Put Wonderboom 2 Speaker into Pairing Mode.
iPadOS Bluetooth Settings page, showing the Wonderboom 2 speaker as found and highlighted.

Other Posts About the Wonderboom 2 Bluetooth Speaker

  1. Wonderboom 2 Battery Indicator, Charging Indicator
  2. How to Reset Wonderboom 2 Bluetooth Speaker
  3. Wonderboom 2 Charge Time, How Long for Full Charging
  4. How to Tell if Wonderboom 2 is Charging
  5. How to Pair Wonderboom 2 with Alexa

Related Posts

  1. How to Put JBL Charge 4 in Pairing Mode
  2. How to Put Ultimate Ears Wonderboom in Pairing Mode
  3. Putting JBL Xtreme in Pairing Mode, Xtreme 1
  4. How to Put JBL Clip 2 in Pairing Mode
  5. How to Put JBL Flip 3 in Pairing Mode

References for How to Put Wonderboom 2 Speaker Into Pairing Mode

  1. Wonderboom 2 Bluetooth Speaker Official Product Page at UltimateEars.com

Revision History

  • 2021-08-21: Revised the tags and internal links lists.
  • 2020-08-15: First published.