How to Put Wonderboom 3 in Pairing Mode

The Wonderboom 3 Bluetooth Pairing button glowing / flashing white.

To pair your Wonderboom 3 with a Bluetooth source device for the first time, or to update stale connection information in that device, you have to know how to start pairing mode on the speaker. Why? Because in this mode, the speaker transmits its name and currently valid connection data over the Bluetooth airwaves, which enables other nearby Bluetooth devices to pair to it. So in this post, we show you how to put the Wonderboom 3 speaker inpairing mode, to allow you to link it with phones, tablets, computers, and smart speakers.

How to Put Wonderboom 3 in Pairing Mode: Step by Step

1. Turn On the Wonderboom 3

Firstly, turn on the speaker by rapidly pressing its Power button.

E.g. See this button that we point at with the yellow arrow, in the next picture.

Top view of the Wonderboom 3. Showing the dark -Power- button.

The 3 then comes on, as pictured next.

The white glowing -Power- button.

2. Press the Pairing / Discovery Mode Button for Two to Three Seconds

Secondly, to be able to discover your speaker on your source Bluetooth device, place it in pairing mode. For that, press and hold the the Pairing button, as circled in the next picture.

The Wonderboom 3 Bluetooth Pairing button glowing / flashing white.

When you press this Pairing button, the speaker makes a cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture, circled in yellow.

3. Done with How to Put Wonderboom 3 in Pairing Mode

Finally, while the Pairing button is blinking, the Wonderboom 3 is now in pairing mode. So you should see your Wonderboom 3 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.

An iPadOS Bluetooth Settings page. Showing the Wonderboom 3 as found.