Picture of the Amazon Alexa Echo Dot 3rd Generation speaker, shown in Setup mode, light ring orange and spinning.

How to Reset Amazon Alexa Dot 3

Here, we show how to reset the Amazon Alexa Dot 3 to return it to its factory default settings.  So why would you ever reset ?  Because you may desire to sell or give this unit to another person.  Or, connect it to a new Amazon account.  Or sync it to a new WiFi network.  In these cases, resetting is the best way to purge all old account data from the speaker.  A reset gets it ready to attach to a new account and / or WiFi network.  So to reset it and unlink it from its current Alexa account, run through the directions below.

Do not always reset as a first step to fix strange behavior though, as this can create lots of unnecessary effort. So before resetting, try turning it OFF for fifteen seconds by unplugging its power cord either from the AC outlet, or from the unit itself.  Then, wait for a quarter minute. Then plug it back in. Rebooting often restores proper working, without doing a full reset. But if not, read on for the proper full reset procedure.

Once you reset the Amazon Alexa Dot 3, it will no longer work via your Amazon account.  So to restore control, run through the setup instructions again.  There, relink the unit to your account again via the Alexa app.

How to Reset Amazon Alexa Dot 3: Step by Step

1. Attach the AC Power Cable

First, connect the speaker to its 12-volt power adapter cord, as shown next.

Picture of the Amazon Alexa Dot 3 AC power adapter, plugged into the back.
The Amazon Alexa Dot 3 AC power adapter, plugged into the back.

2. Next, Plug the Cord into a Working Power Outlet

See this as shown next.

Picture of the assistant speaker powering up, showing its AC adapter plugged into standard wall outlet.
The assistant speaker powering up, showing its AC adapter plugged into standard wall outlet.

Then, wait for the unit to finish booting.  It’s done booting when either the light ring goes dark, or it begins flashing orange, red, or purple.

3. Next, Press and Hold the Action Button for 5 to 10 Seconds to Continue with How to Reset Amazon Alexa Dot 3

Press the   Action   button until the light ring turns orange.  You should also hear it say that it is entering Setup mode.  On this model, the  Action button doubles as the   Reset   button, and is pointed at by the green arrow in the next picture.

Top view of the Amazon Alexa Dot 3, showing the Action button highlighted.
Top view of the Amazon Alexa Dot 3, showing the -Action- button highlighted.

4. Finally, What Happens After Reset?

Your Amazon Alexa Dot 3 is now restored to its factory default settings.  It also has entered   Setup   mode, as shown next.

Picture of the unit in Setup mode, light ring orange and spinning.
The unit in Setup mode, light ring orange and spinning.

5. Done with How to Reset Amazon Alexa Dot 3 ! 

Pack it Up or Set it Up Again

You may now give this smart speaker to someone else.  Indeed, there’s no need to  fear that they’ll have access to the Alexa settings on your Amazon account. They won’t.  Or, you can set it up again on your existing account. But if selling, we suggest that you pack it in the carton it came in. Do this for safest transport through the mail, as shown in the next picture.  Then, pack that box into another outer box for further safety.

Front view of the Amazon Alexa Dot 3 box.
Front view of the Amazon Alexa Dot 3 box.

Related Posts to How to Reset Amazon Alexa Dot 3

  1. Pairing JBL Charge 3 with Amazon Alexa Dot
  2. How to Connect Alexa Dot to WiFi

References for How to Reset Amazon Alexa Dot 3

  1. The Amazon Alexa Dot (3) – Smart speaker with Alexa, on Amazon.com
  2. Where to Buy an Amazon Alexa Dot 3