JBL Clip 2 Bluetooth speaker, front view, vertical orientation.
We show you here how to reset JBL Clip 2 speaker to its default factory settings. The reset routine works as follows.
Resetting restores this speaker to factory default state. Plus it erases any earlier paired devices from its memory. Clearing these stops the 2 from auto pairing to any devices afterwards. Also, you might reset to get the speaker ready or sale or re-gifting, or to stop it from pairing with devices you no longer wish it to pair with whenever you turn it on.
Press and hold the power button until the status lamp lights up and the guitar strum sound plays.
Find the power button, as shown in the last picture above.
Then, the status light comes on, as shown next.
The speaker makes a rising electric guitar strum sound when it powers up. The JBL Clip 2 is ready for use after this sound finishes. It may or may not pair with a device, depending on whether there are any in-range Bluetooth devices that know about the Clip. Whether paired the reset works the same way, as follows.
Find the Phone and UP Volume buttons. The Phone button is in the middle of the left side panel of the speaker, and the Volume UP button is to its left, as circled in the next picture.
The Clip 2 then resets. Within a second or two, the unit powers off. And the falling guitar strum sounds. Then the status lamp goes dark.
Next, power on the speaker again, as we did in step 1 above.
Note that after reset, the speaker comes up in ready-to-pair mode. So the status lamp rapidly flashes blue.
The reset is now complete. So you may now gift or sell the speaker. Or pair it again with your favorite Bluetooth devices.
After reset, the JBL Clip 2 no longer automatically connects with any device. Thus, to restore auto pairing, manually pair the Clip 2 with a device. Then whenever both the Clip 2 and that device are in range, auto pairing takes place again.
You must know how to set the Echo speaker to pairing mode to connect it…
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
