How to Reset JBL Speaker Flip 5

Explains how to reset the  JBL speaker Flip 5 model, to restore it to default settings.  In summary: First switch on this speaker.  Then once it completes booting, press the Play-Pause and Volume UP buttons together. After a short pause, the speaker then shuts down with all lights on it going dark.  At this point, the reset is complete.  Now for a more detailed explanation of how to do this, please see what follows.

How to Reset JBL Speaker Flip 5: Step by Step

Resetting erases any earlier paired Bluetooth devices from its memory.  Clearing these stops it from pairing to any nearby BT devices afterwards.  Also, you might reset the speaker to get it ready for sale or re gifting. Or reset to stop it from pairing with devices you no longer wish it to pair with.

1. Power UP the Speaker

Press and hold the Power button until it lights up.

Then, the Power button lights up along with the battery power scale.  Here, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth discovery mode.  We know that because the Power button is glows solid gray, rather than blinking blue.

2. Wait for the Power Up Sound

The speaker makes a rising rock guitar strum sound when it powers up.  This Flip is ready for use after this sound finishes.

3. Press the Volume UP and Play-Pause Buttons Together

See the next picture to find the Play-Pause and UP Volume buttons.

The speaker then enters reset.  Note that both the Bluetooth and Power buttons light up gray white for a couple seconds.

Then after a short pause, the 5 turns off.  All the lights go off, and it makes the power-down guitar sound.

4. Check that Reset Did Work

Next, power on the unit again, as described in step 1 above.

Now this time, after reset, our speaker comes up in Bluetooth discovery mode, as shown next.  Note that the Bluetooth button blinks white to denote this.  When the   Bluetooth  button blinks, this means that the Flip 5 is has no current pairing.  Indeed, we expect it not to pair to anything after a reset.

5. Done with How to Reset JBL Speaker Flip 5 !

Resetting is now complete.  You may now pack up the 5 for sale, or pair it again with your favorite BT devices.  The unit will no longer automatically connect with any previously paired Bluetooth device that is in range.  To restore automatic Bluetooth pairing, manually pair the Flip 5 with a tablet or phone.  Then, any time that both speaker and that device have Bluetooth turned on, pairing with automatically take place once more.

Other Posts About JBL Speaker Flip 5

1. 1. How to Charge JBL Speaker Flip 5

References

1. 1. The JBL Speaker Flip 5 Official Product Page
   2. Where to Buy the JBL Speaker Model Flip 5