Bluetooth Speakers

How to Reset Sony SRS XB21

Show you how to reset your Sony SRS XB21 to its default settings.  Resetting restores the 21 to default state. Plus, resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops the 21 from pairing to any nearby Bluetooth devices. Also, you might reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

How to Reset Sony SRS XB21: Step by Step

1. Turn the Unit ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

Sony SRS XB21 -Power- button.

Then, the status light comes ON.

The -Power- lamp glowing.

The 21 may make a ding-dong tone sound when it powers up, should it connect to a nearby device. Or it may make no sound at all if it does not.  Whether the unit pairs or not though, this reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

The -Power- and -Volume Down- buttons.

The XB21 then enters reset mode.

Then after a miniscule pause, the 21 powers OFF, and the status lamp goes dark, as shown next. Note that on the SRS XB21, there is no power-down sound.

Sony SRS XB21 -Power- lamp dark.

3. Check that your Sony SRS XB21 Did Indeed Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after reset, the XB21 comes up in discovery mode. The Pairing Mode lamp fast flashes white to let you know this.

The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Reset Sony SRS XB21 !

The reset is now finished. So you may now sell or gift it, or pair it again with your favorite Bluetooth devices.

After a reset, the XB21 no longer automatically links with any previously paired Bluetooth device. Thus, to restore auto connecting, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth activated, and they’re near to each other, pairing would automatically take place once more.

Other Posts About the Sony SRS XB21

    1. How to Reset
    2. Checking Battery Life
    3. How to Turn Off Lights on Sony SRS XB21
    4. How to Put in Pairing Mode
    5. The WPC Button Explained

References for How to Reset Sony SRS XB21

    1. Sony SRS XB21 Official Product Page
    2. Where to Buy the Sony SRS XB21
Tom Hesley

Recent Posts

Restart Chromecast Audio Directions

Gives the Restart Chromecast Audio Directions.  Now you may wish to do this if you…

2 hours ago

Chromecast Audio How to Reboot

Gives the Chromecast Audio How to Reboot directions.  Now you may wish to reboot Google…

2 hours ago

Google Chromecast Audio Equalizer Adjust Bass Treble

Gives the procedure for Google Chromecast Audio Equalizer Adjust Bass Treble settings. Now this audio…

4 hours ago

Google Home Chromecast App on iOS Screenshots 2016

Since the release of the free Google Home App for iOS devices back in the…

5 hours ago

Reset Chromecast Audio

Here, we give the Reset Chromecast Audio procedure.  Now resetting restores this streaming receiver to…

5 hours ago

Where Is the Reset Button on Google Chromecast Audio Receiver

In this piece, we show Where Is the Reset Button on Google Chromecast Audio Receiver. …

5 hours ago