Screenshot of the Home page for the Sony SRS XB31 speaker in the Sony Music Center app.

How to Reset Sony SRS XB31 Bluetooth Speaker

Show you how to reset your Sony SRS XB31 Bluetooth speaker to its out-of-the-box settings.  Resetting restores the XB31 to default state. Plus, resetting erases any prior synced Bluetooth devices from memory. Removing these stops this unit from pairing to any nearby Bluetooth devices. Also, you might reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.





How to Reset the Sony SRS XB31 Speaker, Step by Step Procedure

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

Picture of the -Power- button on the Sony SRS XB31 speaker.
Sony SRS XB31 speaker -Power- button.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.

Picture of the -Power- lamp glowing. How to Reset Sony SRS XB31.
The Sony SRS XB31 speaker -Power- lamp glowing.

The speaker may make a bing-bong sound when it starts up, to announce that it has paired, should it connect to a nearby device. Or it may make no sound at all if it does not.  Whether the unit pairs or not though, this reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

Picture of the Sony SRS XB31 speaker, showing the Volume DOWN and Power buttons.
The Sony SRS XB31 speaker, showing the Volume DOWN and Power buttons.

The XB31 then enters the reset process.

Then after roughly five seconds, the speaker powers OFF, and the status lamp goes dark, as shown next. So release the buttons at this point. Note that on the SRS XB31, there is no power-down sound.

Picture of the dark -Power- lamp.
The dark -Power- lamp.

3. Check that your Sony SRS XB31 Speaker Did Indeed Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after reset, the XB31 starts up in discovery mode. The Pairing Mode lamp quickly flashes blue to let you know this. E.g. See this in the next picture.

Picture of the Bluetooth Status lamp glowing.
The Bluetooth Status lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.





4. Done with How to Reset the Sony SRS XB31 !

The reset is now finished. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After a reset, the XB31 no longer automatically joins with any Bluetooth device. So to restore auto connecting, you first must manually pair it with a device. Then any time after that, that both speaker and that device have Bluetooth turned on, and are in range, pairing automatically occurs  once more.

Related Posts to How to Reset Sony SRS XB31

  1. How to Reset Sony SRS XB32 Speaker
  2. How to Reset Sony SRS XB01 Wireless Speaker
  3. Sony SRS X11 Bluetooth Cube How to Reset
  4. How to Reset Sony SRS XB23 Wireless Speaker
  5. Sony SRS XB41 Speaker How to Reset

Other Posts About the SRS XB31 Sony Speaker

  1. Checking Battery Life on the Sony SRS XB31 Speaker
  2. How to Make the XB31 Discoverable
  3. Sony SRS XB31 Putting into Pairing Mode
  4. How to Switch Off the Sony SRS XB31 Bluetooth Speaker
  5. Turning Off the Party Lights on the XB31

References for How to Reset the Sony SRS XB31

  1. Sony SRS XB31 Bluetooth Wireless Speaker Product Page at Sony.com

Revision History

  • 2021-09-28: First published.
%d bloggers like this: