The -Power-, -Volume DOWN-, and -Volume UP- buttons on the Sony SRS X11 speaker.

How to Reset Sony X 11

Show you how to reset your Sony X 11 personal portable speaker to its default settings. Resetting restores the X 11 to factory default state. Plus, resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops this speaker from pairing to any nearby Bluetooth devices. Also, you might reset your speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.

How to Reset Sony X 11 

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The -Power- button on the Sony X 11 tiny personal speaker.
The Sony X 11 -Power- button.

 

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.  This light we find on the bottom edge of the front of the unit.

The glowing -Status- light.
The -Status- lamp glowing.

The speaker makes a ding-dong beep sound when it powers up, whether it connects to a nearby device or not. But whether it pairs or not, this reset routine works the same way, as follows.





2. Press and Hold the Volume DOWN , Volume UP, and Power Buttons at the Same Time

Find these buttons as shown next.  All three of them we find on the top of the speaker, near the front edge, as called out in the next picture.

The -Power-, -Volume DOWN-, and -Volume UP- buttons. How to Reset Sony X 11.
The -Power-, -Volume DOWN-, and -Volume UP- buttons.

The X 11 then enters reset mode after a brief pause.

Then the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on this speaker, there is no power-down sound.

The dark -Status- light on the speaker.
The dark -Status- lamp.

3. Check that your Sony X 11 Speaker Did Indeed Reset

Next, power on the X 11 again, as described in step 1 above.

Note that after a reset, this speaker comes up in pairing mode. The Status lamp blinks white rapidly to tell you this.  This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Reset the Sony X 11 Bluetooth Speaker !

The reset is now finished. So you may now sell or gift the unit, or pair it again with your favorite Bluetooth devices.

After a reset, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto pairing, you manually pair the X 11 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.

Related Posts to How to Reset Sony X 11

    1. How to Reset Sony Speaker XB23
    2. How to Reset Sony SRS XG500
    3. How to Reset JBL Flip 4 Bluetooth Speaker
    4. How to Reset JBL Charge 4 Speaker
    5. How to Reset JBL Clip 2 Speaker

Other Sony X 11 Posts

    1. How to Turn Off Sony X 11
    2. Sony X 11 Specs Watts
    3. Sony X 11 Not Charging
    4. Sony X 11 Orange Light Stays On

References

    1. Official Sony X 11 Support Page
    2. Where to Buy the Sony X 11

Revision History

    • 2023-04-17: First published.