Here, we describe how to reset Ultimate Ears Wonderboom 2. This restores the factory default settings to the unit. This works as follows.
Resetting Ultimate Ears Wonderboom 2 speakers wipes any memorized Bluetooth devices from memory. Clearing this data prevents the UE from pairing to any nearby Bluetooth devices after the reset. Further, you might reset the Ultimate Ears Wonderboom 2 to re gift it. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We’ve circled the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The Ultimate Ears Wonderboom 2 makes a unique sounding turn-on noise. The UE is then ready for reset when this sound finishes. It may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about this Ultimate Ears speaker and that it have previously paired with as well. Whether paired or not, reset works the same way, as follows.
Ultimate Ears speakers do not reply to reset requests while connected with a source Bluetooth device. So, unpair the 2 before resetting.
Find the Power and Volume DOWN buttons. The Power button is on the top of this speaker, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both pointed out by the green arrows in the next picture.
Ultimate Ears then enters reset. Then, in a few seconds, the unit powers off when reset wraps up. The falling electronic kar-plunk sound goes off. Then the status light in the Power button goes dark, as shown above.
Next, power on the speaker again, as detailed in step 1 above.
After a reset, Ultimate Ears comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
Reset is done now. So go ahead and let someone else use the speaker. Or pair it once more with your favorite Bluetooth devices.
After a reset, the Wonderboom no longer auto connects with any prior paired Bluetooth devices. Thus, to set up automatic BT pairing, you pair by hand the Ultimate Ears with your desired device(s). Then any time that both the speaker and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to the Wonderboom from your source Bluetooth devices that you set up prior to hard resetting the speaker. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
Here is our Honeywell T87N1026 Large Thermostat Review. Now the T87N1026 offers a quick and…
The Honeywell T87N1026 large dial thermostat offers a quick and easy-to-install climate control solution, and…
The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…
The common Honeywell thermostat offers several ways (at least) to cut your heating and cooling…
Today's thermostats have so many new functions. So there are many more wires to connect…
This piece explains How to Reset Settings on Honeywell Thermostat. Now a reset of these…