Here, we show how to restart the Amazon Echo Dot 3rd Generation smart speaker, and put it back to factory default settings. So why would you ever want to restart it? Well, you may wish to sell or give it to another person. Or link it to a new Amazon account. Or connect it to a new WiFi network. In all these cases, restarting is the best way to clean out all old account data from this Alexa speaker. Restart gets it ready to use on a new account and / or WiFi network.
To restart Amazon Echo Dot 3rd generation and unlink it from its current Amazon account, run through the routine below.
Do not always restart as a first step for fixing weird speaker behavior. Before restarting, try turning the speaker off for fifteen seconds. Do this by unplugging its power cable either from the wall outlet, or from the speaker itself. Then, wait for a quarter minute. Then plug it back in. This rebooting often restores proper working. But if not, read on for the proper restart procedure.
Once you restart Amazon Echo Dot 3rd generation you’ll no longer be able to control the speaker from your Amazon account. To get control of it back, run through the setup procedure again. There, relink the speaker to that account again via the Alexa app.
How to Restart Amazon Echo Dot 3rd Generation
1. Attach Wall Power Cable
First, connect the smart speaker to its 12-volt power adapter cord, as shown next.
2. Next, Plug the Power Cord into a Working Wall Outlet
See this as shown next.
Then, wait for the speaker to finish booting. Booting is done when either the light ring goes dark, or it begins flashing orange, red, or purple.
3. Next, Press and Hold the Action Button for 5 to 10 Seconds to Continue with How to Restart Amazon Echo Dot 3rd Generation
Press the Action button until the light ring turns orange. You should also hear the speaker announce that it is entering setup mode. On this speaker, the Action button doubles as the Restart button, and is pointed at by the green arrow in the next picture.
4. Finally, What Happens After Restart ?
Your 3rd Generation Amazon Echo Dot is now restored to its factory default settings. It also has entered Setup mode, as shown next.
Pack it Up or Set it Up Again
You may now give your Echo Dot Amazon 3rd Generation to another now. Don’t fear that they’ll have access to the Alexa settings on your Amazon account. Or, you can set it up again on your existing account.
But if selling, we suggest that you pack the speaker in its original carton. Do this for safest transport through the mail, as shown in the next picture. Then, pack this box in another outer box for further safety.
Other Posts About the Amazon Echo Dot 3rd Generation
Related Posts to How to Restart Amazon Echo Dot 3rd Generation
- How to Restart Echo Dot Smart Speaker
- Restarting Chromecast Audio
- How to Restart JBL Xtreme Bluetooth Speaker
- Restart Amazon Echo Dot Speaker, How To
- How to Restart JBL Flip 4 Bluetooth Speaker
References for How to Restart Amazon Echo Dot 3rd Generation
Revision History
- 2020-07-01: First published.