How to Tell if JBL Go 3 Is Charging? This little speaker has just one LED lamp on its side as shown in the pictures that follow. This two-color lamp not only indicates speaker power ON, OFF, and pairing status. But it also tells battery level and charging status. So to see if this speaker is charging, just look at this light. We describe how to read it below.
Of course, you can be certain that the Go is NOT charging with no power cord connected to it.
You can tell if the JBL Go 3 is charging if this lamp glows steady red. But this light can blink red as well. If it flashes red with the power cord connected, then the speaker is not charging. Further, you should check your USB cord and power adapter for proper operation. Try a different charger. You want this light glowing solid red. Indeed the speaker is not recharging if the lamp glows or flashes any other color or pattern than solid red.
Also, the Go 3 slightly warms as it charges as does most charger adapters you would power it with. This warmth is a handy way to tell if the JBL Go is in fact, charging.
As speaker charging moves on, the status lamp continues to glow solid red. The JBL Go 3 gives no indication though, of just how far along the battery charging is. It just signals that charging is in progress. See the red glowing lamp in the last picture.
The LED tells us when the battery charge cycle is done. It does this by changing from solid red to any other color or pattern. This includes going dark, as we see next.
The lamp stops glowing altogether when the battery is full. This is the case even with the charger cord still plugged in, and the speaker is OFF. The speaker stops charging when the battery reaches full.
If the power LED flashes solid or flashing white, this could mean that the Go 3 did indeed charge. But with the cord disconnected, we cannot tell just by examining the power lamp, just how much charge it took. But it probably did recharge to full though. This is definitely true if we waited until the light stopped glowing red before disconnecting the charger.
The JBL Go 3 model has a few buttons on the top and sides. Plus,…
Covers the JBL Go 3 Firmware Update Instructions. However, we know of no way to…
We show you here How to Factory Reset JBL Go 3 BT Speaker, to restore…
This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing…
When the JBL Go 3 Speaker Won't Turn ON, this likely means one or more…
Explains How to Put JBL Go 3 Speaker in Pairing Mode. So first, turn on…