Thermostats

How to Turn OFF Screen Lock on Honeywell Thermostat

Honeywell RTH9580WF smart thermostat, displaying its -Security Settings- screen, with the -Unlocked- button highlighted.

Many Honeywell home thermostats have a lock screen mode. This keeps anyone from messing with t-stat settings without first putting in a password. You set this pass code when locking your t-stat. Then, to unlock it, the t-stat asks you to enter this secret code. Once you do that, you again have full control over settings such as WiFi, temperature, scheduling, and other HVAC details. So here we explain How to Turn OFF Screen Lock on Honeywell Thermostat. Explicitly, we show this on the RTH9580WF programmable WiFi thermostat.

This demo begins with our t-stat locked. We also assume that the t-stat is showing its Home page.

Honeywell RTH9580WF home thermostat, front view after initial setup.

How to Turn OFF Screen Lock on Honeywell Thermostat: Step by Step

1. On the Home Screen, Tap the MENU Option

Find the MENU button in top right corner of that page. Note that even when the t-stat is in lock mode, the MENU button still works.

This then displays the main menu page. Keep in mind that you might have to press the down-arrow button several times to reach the Security Settings option.

The next picture shows the main menu, already scrolled, to show the Security Settings item.

The thermostat displaying its main menu, with the -Security Settings- option highlighted.

2. Tap the Security Settings Option

A password protected Honeywell home thermostat then shows the Please enter your password prompt screen.

The -Please Enter Your Password- screen, with no passcode entered yet.

3. Enter the Pass Code

Then enter the code you assigned when you set up the password. In this scenario, our security code was 2752. So, we used the up and down arrows above and below each number position. With these, we can enter the correct digit for each position.

Again, unlocking allows access to the Security Settings menu. There you can either fully unlock, partially lock, or remove the password altogether.

The -Please Enter Your Password- Screen, with pass code 2752 entered.

4. Press the Done Button to Continue with How to Turn OFF Screen Lock on Honeywell Thermostat

So tap Done once you punch in the pass code. The thermostat then shows the Security Settings screen.

From here, you could choose either of the following.

- Delete the Security Settings password.
- Change the lock mode while leaving the existing password in place.

You need not remove the password to unlock the home thermostat. Nor must you change the lock mode in order to remove the password.

The -Security Settings- screen, showing the -Remove Password- button with the -Change Lock Mode- button highlighted.

5. Tap the Change Lock Mode Button

Then this again displays the Change Lock Mode screen, that shows the Fully Locked option highlighted in blue.

The -Security Settings- screen, with the -Unlocked- button highlighted.

6. Tap the Unlocked Button

This unlocks the Honeywell home thermostat and returns you to the Security Settings screen.

The -Security Settings- screen, with the -Previous Menu- button highlighted.

7. Tap the Previous Menu Button

Then this returns you to the main menu as shown next. Note that all menu items are now available. Verify this by scrolling down through them. If you see the following items such as…