How to Turn ON Bass Boost on JBL Charge 5

Unfortunately, the usual way for how to turn ON bass boost on JBL Charge 5 does not work. Further, we know of no other way to activate this mode. But you could simulate it by adjusting an equalizer app on your streaming source device. Hopefully, JBL will add this feature in a later version of the firmware.

But if this did work, it might operate as follows, just as it has on other JBL Charge speakers.

Now when ON, this mode would make the passive bass radiators vibrate noticeably more.  Moreover, extra bass mode would add a decidedly “thumpy” aspect to the content playing. This could make this speaker sound much bigger than it really is.

How to Turn ON Bass Boost on JBL Charge 5: Step by Step

First off, by default, this Bluetooth speaker would have bass boost ON.  Moreover, if this toggling actually worked, then it would also add more treble as well as extra bass as well.

How to Turn ON Bass Boost on JBL Charge 5: Switch It ON

Some day, we hope that you’ll be able to turn this extra bass mode ON. It would go as follows. Press the Volume Down (-) and Bluetooth buttons for about ten seconds.  You would release them when the oval ring lights up.

Also, to reverse what you did above, then again, you would press the Volume Down and Bluetooth buttons. Hold them in until the oval button ring lights up once more.  Then release them.  Finally, when the ring goes dark, bass mode would go back to what it was before.

Qualifiers

1. 1. Speaker firmware version for this test: 0.5.2.0.

Other JBL Charge 5 Posts

1. 1. JBL Charge 5 Bluetooth Pairing
   2. JBL Charge 5 Not Charging
   3. How to Check Battery on JBL Charge 5

References

1. 1. Official JBL Charge 5 Support Page
   2. Where to Buy the JBL Charge 5