Bluetooth Speakers

How to Turn On Sony XE 300

We explain how to turn on the Sony XE 300 column here.  Now most BT speakers have a Power button that Sony prominently places on the unit so it’s easy to find.  Indeed, this speaker is no exception, as we find its Power button on the top panel, as we see next.

The Power button on the Sony XE 300.

There’s also a status lamp, just above the Power button, that glows any time the 300 is running.

The green glowing Power lamp.

Then, we also have the Bluetooth status lamp, that starts flashing or glowing blue when the speaker powers up, as we point out below.

The blue glowing Bluetooth Pairing light on the Sony XE 300.

Both these lamps are dark when the XE 300 is OFF.

How to Turn On Sony XE 300

To power up the 300, press the Power button. Then release after a quarter second or so.  Also, you needn’t hold it in for too long for the unit to see your press and then turn itself on.

When the speaker comes on, the Bluetooth status lamp starts blinking or glowing steadily. The speaker also makes a rising startup sound.   It further sounds a ding-dong sort of chime pattern and announces if and when it pairs to a nearby Bluetooth device.  But if it pairs with nothing, then all you hear is the startup sequence.

But if pressing the Power button does not turn on the XE 300, or if the CHARGE light blinks orange, it could be that you need to recharge your speaker.

So if the unit won’t come on, try connecting the included charger to it.  Yes, you can indeed play the speaker as it charges, though it may take longer to fully recharge, especially if you play it very loud.

An Echo Dot 4 clock speaker beside the Sony XE 300.

Now with the charger supplying power, this speaker should always power on when you click the Power button.  If not, then the unit may not be getting any juice from the AC adapter.  So check that the receptacle you’re connecting the power supply to is live, that the charger adapter works, that the cable between it and the XE 300 is not frayed, and that the charger’s USB-C plug completely seats in the speaker’s 5 volt DC power input port.

But if after all these checks the speaker still does not turn on, then the unit itself may be ruined. So in that case, take it to a qualified Sony service center for repair, or buy a new one.

Related Posts to How to Turn On Sony XE 300

    1. How to Turn On Sony XB23
    2. How to Turn On the Sony XG500
    3. How to Turn On Sony XB41
    4. How to Turn On the Sony XB 40 Speaker

Other Sony XE 300 Posts

    1. XE 300 Software Update Instructions
    2. XE 300 Charging Directions
    3. Sony XE 300 Specs Watts Figures
    4. How to Pair the XE 300 Speaker
    5. How to Bass Boost the XE 300

References

    1. Official Sony XE 300 Support Page
    2. Where to Buy the XE 300

Revision History

    • 2023-04-10: First published.
admin

Recent Posts

How to Connect Google Home Mini to Bluetooth

This post shows how to connect Google Home Mini to Bluetooth speakers.  Here, we show…

16 mins ago

JBL Flip 4 Firmware Update

Gives the JBL Flip 4 firmware update procedure.  This routine can take up to thirty…

24 mins ago

Changing Wi-Fi Network on Google Home Speaker

You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…

15 hours ago

JBL Charge 3 Controls Explained

The JBL Charge 3 features several controls and lights across its top, as well as…

21 hours ago

Hard Reset Google Home Mini Speaker

Here we give the hard reset Google Home Mini speaker routine.  You might hard reset…

21 hours ago

Hard Reset Google Home Speaker

You can hard reset all of the smart speakers in the Google Home family. These…

21 hours ago